ARD: High-grade silver extends beyond Kempfield Resource
Original announcement by asx on
- Company
- Argent Minerals Limited
- Ticker
- ARD
- Exchange
- ASX
- Region
- New South Wales
- Primary commodity
- Silver
- Secondary commodities
- Lead, Zinc, Gold
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-24 00:26:23 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Argent Minerals Limited reports high-grade silver and polymetallic drill results from its Kempfield Project in New South Wales, with the 2026 drilling campaign successfully expanding the known mineralised footprint. Key intercepts include 18.2m at 187.3 g/t Ag from 168m in AKDD217, extending mineralisation beyond the current resource boundary, and 29.8m at 34.6 g/t Ag from 60m in AKDD216, extending depth. The results confirm resource growth potential, with mineralisation remaining open along strike and at depth. The company also provides an update on its July 2024 JORC-compliant Mineral Resource Estimate.
Reasoning: New high-grade silver and polymetallic intercepts extend known mineralisation beyond the current resource boundaries and confirm continuity in under-drilled areas, indicating strong potential for resource growth. The results are not directly comparable to prior RAG gold results for Kempfield.
Positive factors
- high_grade_intercepts
- resource_extension
- polymetallic_mineralisation
- mineralisation_open
- jorc_compliant
- qp_signed
- certified_lab
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 94
Extracted facts
Stored fact records: 94. Some facts used in scoring do not have a stored record.
Drill Results (94)
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 0 m
- To
- 1.6 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:0-1.6
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0.7Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 0 m
- To
- 1.6 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:0-1.6
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.7”
Context: 1.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.02Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 0 m
- To
- 1.6 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:0-1.6
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.02”
Context: 1.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.07Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 0 m
- To
- 1.6 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:0-1.6
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.07”
Context: 1.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 1.6 m
- To
- 3.2 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 1.6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:1.6-3.2
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 1.6 m
- To
- 3.2 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 1.6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:1.6-3.2
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.9”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.09Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1 m
- From
- 1.6 m
- To
- 3.2 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 1.6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:1.6-3.2
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.09”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.3Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 1 m
- From
- 1.6 m
- To
- 3.2 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 1.6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:1.6-3.2
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.30”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 3.2 m
- To
- 4.7 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 3.2 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:3.2-4.7
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 3.5Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 3.5
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 3.2 m
- To
- 4.7 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 3.2 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:3.2-4.7
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“3.5”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.13Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 3.2 m
- To
- 4.7 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 3.2 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:3.2-4.7
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.13”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.23Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 3.2 m
- To
- 4.7 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 3.2 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:3.2-4.7
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.23”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 4.7 m
- To
- 6 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 4.7 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:4.7-6
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 4.7 m
- To
- 6 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 4.7 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:4.7-6
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.0”
Context: 1.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 4.7 m
- To
- 6 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 4.7 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:4.7-6
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.00”
Context: 1.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.07Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 4.7 m
- To
- 6 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 4.7 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:4.7-6
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.07”
Context: 1.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 6 m
- To
- 7 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:6-7
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 6 m
- To
- 7 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:6-7
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.0”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1 m
- From
- 6 m
- To
- 7 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:6-7
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.00”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.03Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1 m
- From
- 6 m
- To
- 7 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:6-7
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.03”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 7 m
- To
- 8.3 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 7 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:7-8.3
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 7 m
- To
- 8.3 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 7 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:7-8.3
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.0”
Context: 1.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 7 m
- To
- 8.3 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 7 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:7-8.3
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.00”
Context: 1.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.08Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 1.3 m
- From
- 7 m
- To
- 8.3 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 7 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:7-8.3
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.08”
Context: 1.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 8.3 m
- To
- 9.4 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 8.3 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:8.3-9.4
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 8.3 m
- To
- 9.4 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 8.3 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:8.3-9.4
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.0”
Context: 1.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.01Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.1 m
- From
- 8.3 m
- To
- 9.4 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 8.3 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:8.3-9.4
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.01Grade Unit: %Intercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.1 m
- From
- 8.3 m
- To
- 9.4 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 8.3 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:8.3-9.4
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 9.4 m
- To
- 10 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 9.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:9.4-10
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 0.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 1.4Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 9.4 m
- To
- 10 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 9.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:9.4-10
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“1.4”
Context: 0.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.13Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 9.4 m
- To
- 10 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 9.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:9.4-10
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.13”
Context: 0.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.28Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 9.4 m
- To
- 10 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 9.4 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:9.4-10
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.28”
Context: 0.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 10 m
- To
- 11 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 10 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:10-11
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 1.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 10 m
- To
- 11 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 10 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:10-11
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“1.1”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.11Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 1 m
- From
- 10 m
- To
- 11 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 10 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:10-11
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.11”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.34Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 1 m
- From
- 10 m
- To
- 11 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 10 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:10-11
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.34”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 11 m
- To
- 12 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 11 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:11-12
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 1.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 11 m
- To
- 12 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 11 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:11-12
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“1.1”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.11Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 1 m
- From
- 11 m
- To
- 12 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 11 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:11-12
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.11”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.2Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 1 m
- From
- 11 m
- To
- 12 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 11 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:11-12
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.20”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 12 m
- To
- 13 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:12-13
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 12 m
- To
- 13 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:12-13
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.8”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.09Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1 m
- From
- 12 m
- To
- 13 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:12-13
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.09”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.11Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 1 m
- From
- 12 m
- To
- 13 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 12 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:12-13
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.11”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 13 m
- To
- 14 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 13 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:13-14
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 13 m
- To
- 14 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 13 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:13-14
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.0”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1 m
- From
- 13 m
- To
- 14 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 13 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:13-14
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.00”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.1Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 1 m
- From
- 13 m
- To
- 14 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 13 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:13-14
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.10”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 14 m
- To
- 15 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 14 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:14-15
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 14 m
- To
- 15 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 14 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:14-15
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.0”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1 m
- From
- 14 m
- To
- 15 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 14 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:14-15
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.00”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.05Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 1 m
- From
- 14 m
- To
- 15 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 14 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:14-15
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.05”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 15 m
- To
- 16 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 15 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:15-16
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 15 m
- To
- 16 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 15 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:15-16
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.0”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1 m
- From
- 15 m
- To
- 16 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 15 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:15-16
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.00”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.07Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1 m
- From
- 15 m
- To
- 16 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 15 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:15-16
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.07”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 16 m
- To
- 17 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 16 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:16-17
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 16 m
- To
- 17 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 16 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:16-17
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“1.0”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.07Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1 m
- From
- 16 m
- To
- 17 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 16 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:16-17
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.07”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.19Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 1 m
- From
- 16 m
- To
- 17 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 16 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:16-17
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.19”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 17 m
- To
- 18 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 17 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:17-18
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 1.2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 17 m
- To
- 18 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 17 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:17-18
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“1.2”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.07Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1 m
- From
- 17 m
- To
- 18 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 17 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:17-18
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.07”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.35Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 1 m
- From
- 17 m
- To
- 18 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 17 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:17-18
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.35”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 18 m
- To
- 19 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 18 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:18-19
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 18 m
- To
- 19 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 18 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:18-19
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.5”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.03Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1 m
- From
- 18 m
- To
- 19 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 18 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:18-19
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.03”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.08Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 1 m
- From
- 18 m
- To
- 19 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 18 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:18-19
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.08”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 19 m
- To
- 20 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 19 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:19-20
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 19 m
- To
- 20 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 19 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:19-20
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.0”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1 m
- From
- 19 m
- To
- 20 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 19 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:19-20
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.00”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 19 m
- To
- 20 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 19 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:19-20
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.02”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 20 m
- To
- 21 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:20-21
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 20 m
- To
- 21 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:20-21
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.0”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1 m
- From
- 20 m
- To
- 21 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:20-21
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.00”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 20 m
- To
- 21 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 20 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:20-21
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.02”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 21 m
- To
- 22 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 21 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:21-22
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 21 m
- To
- 22 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 21 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:21-22
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.0”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1 m
- From
- 21 m
- To
- 22 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 21 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:21-22
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.00”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 21 m
- To
- 22 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 21 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:21-22
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.02”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.03Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 22 m
- To
- 23 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 22 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:22-23
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.03”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 22 m
- To
- 23 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 22 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:22-23
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.0”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.01Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 22 m
- To
- 23 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 22 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:22-23
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 22 m
- To
- 23 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 22 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:22-23
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.02”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 23 m
- To
- 24 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 23 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:23-24
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 3.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 3.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 23 m
- To
- 24 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 23 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:23-24
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“3.4”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.16Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 1 m
- From
- 23 m
- To
- 24 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 23 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:23-24
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.16”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.35Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 1 m
- From
- 23 m
- To
- 24 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 23 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:23-24
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.35”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 24 m
- To
- 25 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:24-25
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 24 m
- To
- 25 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:24-25
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.0”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · leadGrade: 0.01Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- lead
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1 m
- From
- 24 m
- To
- 25 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:24-25
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade lead intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · zincGrade: 0.03Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- zinc
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1 m
- From
- 24 m
- To
- 25 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:24-25
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade zinc intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.03”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- gold
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 25 m
- To
- 26 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 25 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:25-26
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Low-grade gold intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.01”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
AKDD215Kempfield · silverGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- AKDD215
- Project
- Kempfield
- Commodity
- silver
- Region
- australia_nsw
- Reported Region
- australia_nsw
- Ticker
- ARD
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 25 m
- To
- 26 m
- Hole Depth
- 114.3 m
- Intercept Depth
- 25 m
Classification
- Deposit Type
- vms
- Program
- exploration
- Sample Type
- drill
- Group ID
- AKDD215:25-26
- Mining Method
- unknown
Location
- Easting
- 708740
- Northing
- 6258799
- CRS
- Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 55
- Elevation
- 751.4 m
- Azimuth
- 360 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: Barren silver intercept from a new exploration hole, but true width is unknown due to vertical drilling.
Negative factors
- apparent_width_only
- vertical_drilling_unknown_true_width
Evidence · table
“0.0”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.