Archive
Original announcement by thenewswire on
- Company
- LAURION Mineral Exploration Inc.
- Ticker
- LME
- Exchange
- TSXV
- Region
- Greenstone, Ontario
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-10-01 06:33:30 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
LAURION Mineral Exploration announced drill results from its Summer 2025 exploration program at the Ishkõday Project in Greenstone, Ontario, targeting gold-bearing vein systems. The program, which included holes LME25-061 and LME25-062, aimed to define gold mineralization north and northeast of the historic Brenbar Shaft. While the company reported encouraging results and confirmed continuity, most intercepts showed low to weak gold grades for an orogenic deposit, with a highlight of 0.50m at 5.18 g/t Au.
Reasoning: The drill results are from an exploration program targeting gold-bearing vein systems, with the company reporting encouraging results and confirming continuity. However, most intercepts show low to weak gold grades for an orogenic deposit, with only one moderate grade intercept. The disclosure of true width estimates and comprehensive QA/QC protocols are positive, but a boilerplate disclaimer about grab/channel samples creates ambiguity regarding the nature of the reported assays.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
- Exploration Drilling
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
- Conflicting Boilerplate
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 32
Classification and evidence
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The release states that 'true widths are estimated at ~70–90% of reported intervals,' providing an estimate for the actual thickness of the mineralization.
Evidence · text
“true widths are estimated at ~70–90% of reported intervals”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed section on 'Sampling and QA/QC Protocols' outlining the use of external standards, blanks, duplicates, and re-assays by ALS facilities.
Evidence · text
“Sampling and QA/QC Protocols All drill core is transported and stored inside the core facility located at the Ishkõday Project in Greenstone, Ontario. LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory. After logging, core samples were identified and then cut in half along core axis in the same building and then zip tied individually in plastic sample bags with a bar code. Approximately five or six of these individual bags were then stacked into a “rice” white material bag and stored on a skid for final shipment to the laboratory. All core samples were shipped to the ALS facility in Thunder Bay, Ontario, which were then prepared by ALS Global Geochemistry in Thunder Bay and analyzed by ALS Global Analytical Lab in North Vancouver, British Columbia. Samples are processed by 4-acid digestion and analyzed by fire assay on 50 g pulps and ICP-AES (InductivelyCoupledPlasma – AtomicElement-Spectroscopy). Over limit analyses are reprocessed with gravimetric finish. A total of 5% blanks and 5% standard are inserted randomly within all samples. 5% of the best assay result pulps were sent for re-assays. All QAQC were verified, and no contamination or bias have been observed.”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: The technical contents of the release were reviewed and approved by Jean-Philippe Paiement, PGeo, MSc, a consultant to LAURION and a Qualified Person as defined by National Instrument 43-101.
Evidence · text
“Jean-Philippe Paiement, PGeo, MSc, a consultant to LAURION and a Qualified Person as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects”
Narrow Interceptsnegative · Story-specific tag
No canonical definition is currently available.
Why it applies: Most reported intercepts are less than 3 meters in core length, with many being 1 meter or less, which are considered narrow for potential mining scenarios.
Evidence · table
“0.8”
Context: LME25-061
Exploration Drillingneutral · Story-specific tag
No canonical definition is currently available.
Why it applies: The program is described as a 'Summer 2025 drill exploration program' designed to 'evaluate the mineralized system' and 'test continuity and strike length,' indicating an exploration objective.
Evidence · text
“Summer 2025 drill exploration program”
Extracted facts
Stored fact records: 32. Some facts used in scoring do not have a stored record.
Drill Results (32)
LME25-061Ishkõday · goldGrade: 0.395Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LME25-061
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.395
- Grade Unit
- g/t
- Intercept
- 0.8 m
- True Width
- 0.64 m
- From
- 38.1 m
- To
- 38.9 m
- Hole Depth
- 330 m
- Intercept Depth
- 38.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-061:38.1-38.9
- Mining Method
- underground
Location
- Azimuth
- 170 °
- Dip
- -60 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.395 g/t) over a narrow width (0.8m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.395”
Context: 0.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.64
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-061Ishkõday · goldGrade: 0.224Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- LME25-061
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.224
- Grade Unit
- g/t
- Intercept
- 2.7 m
- True Width
- 2.16 m
- From
- 152.6 m
- To
- 155.3 m
- Hole Depth
- 330 m
- Intercept Depth
- 38.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-061:152.6-155.3
- Mining Method
- underground
Location
- Azimuth
- 170 °
- Dip
- -60 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.224 g/t) over a narrow width (2.7m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.224”
Context: 2.7
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-061Ishkõday · goldGrade: 0.323Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LME25-061
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.323
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.8 m
- From
- 154.3 m
- To
- 155.3 m
- Hole Depth
- 330 m
- Intercept Depth
- 38.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-061:154.3-155.3
- Mining Method
- underground
Location
- Azimuth
- 170 °
- Dip
- -60 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade (0.323 g/t) over a narrow width (1.0m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.323”
Context: 1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-061Ishkõday · goldGrade: 0.198Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- LME25-061
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.198
- Grade Unit
- g/t
- Intercept
- 2.5 m
- True Width
- 2 m
- From
- 167.5 m
- To
- 170 m
- Hole Depth
- 330 m
- Intercept Depth
- 38.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-061:167.5-170
- Mining Method
- underground
Location
- Azimuth
- 170 °
- Dip
- -60 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.198 g/t) over a narrow width (2.5m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.198”
Context: 2.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-061Ishkõday · goldGrade: 0.336Grade Unit: g/tIntercept: 0.75 mView all detailsHide details
Identity
- Hole ID
- LME25-061
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.336
- Grade Unit
- g/t
- Intercept
- 0.75 m
- True Width
- 0.6 m
- From
- 179.4 m
- To
- 180.15 m
- Hole Depth
- 330 m
- Intercept Depth
- 38.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-061:179.4-180.15
- Mining Method
- underground
Location
- Azimuth
- 170 °
- Dip
- -60 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.336 g/t) over a narrow width (0.75m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.336”
Context: 0.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-061Ishkõday · goldGrade: 0.264Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- LME25-061
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.264
- Grade Unit
- g/t
- Intercept
- 1.1 m
- True Width
- 0.88 m
- From
- 187.6 m
- To
- 188.7 m
- Hole Depth
- 330 m
- Intercept Depth
- 38.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-061:187.6-188.7
- Mining Method
- underground
Location
- Azimuth
- 170 °
- Dip
- -60 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.264 g/t) over a narrow width (1.1m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.264”
Context: 1.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.88
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-061Ishkõday · goldGrade: 0.881Grade Unit: g/tIntercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- LME25-061
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.881
- Grade Unit
- g/t
- Intercept
- 2.25 m
- True Width
- 1.8 m
- From
- 213.85 m
- To
- 216.1 m
- Hole Depth
- 330 m
- Intercept Depth
- 38.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-061:213.85-216.1
- Mining Method
- underground
Location
- Azimuth
- 170 °
- Dip
- -60 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.881 g/t) over a narrow width (2.25m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.881”
Context: 2.25
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-061Ishkõday · goldGrade: 1.101Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- LME25-061
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.101
- Grade Unit
- g/t
- Intercept
- 1.7 m
- True Width
- 1.36 m
- From
- 214.4 m
- To
- 215.1 m
- Hole Depth
- 330 m
- Intercept Depth
- 38.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-061:214.4-215.1
- Mining Method
- underground
Location
- Azimuth
- 170 °
- Dip
- -60 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade (1.101 g/t) over a narrow width (1.7m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“1.101”
Context: 1.7
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.36
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-061Ishkõday · goldGrade: 1.27Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LME25-061
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.27
- Grade Unit
- g/t
- Intercept
- 0.7 m
- True Width
- 0.56 m
- From
- 214.4 m
- To
- 215.1 m
- Hole Depth
- 330 m
- Intercept Depth
- 38.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-061:214.4-215.1
- Mining Method
- underground
Location
- Azimuth
- 170 °
- Dip
- -60 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade (1.27 g/t) over a narrow width (0.7m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“1.27”
Context: 0.7
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.56
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 1.025Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.025
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 20.7 m
- To
- 21.2 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:20.7-21.2
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (1.025 g/t) over a narrow width (0.5m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“1.025”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.762Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.762
- Grade Unit
- g/t
- Intercept
- 1.2 m
- True Width
- 0.96 m
- From
- 105.7 m
- To
- 106.9 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:105.7-106.9
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.762 g/t) over a narrow width (1.2m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.762”
Context: 1.20
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.96
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 1.065Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.065
- Grade Unit
- g/t
- Intercept
- 0.7 m
- True Width
- 0.56 m
- From
- 105.7 m
- To
- 106.4 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:105.7-106.4
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade (1.065 g/t) over a narrow width (0.7m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“1.065”
Context: 0.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.56
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.502Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.502
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 1.6 m
- From
- 111 m
- To
- 113 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:111-113
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.502 g/t) over a narrow width (2.0m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.502”
Context: 2.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.215Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.215
- Grade Unit
- g/t
- Intercept
- 0.8 m
- True Width
- 0.64 m
- From
- 111 m
- To
- 111.8 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:111-111.8
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade (0.215 g/t) over a narrow width (0.8m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.215”
Context: 0.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.64
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 1.455Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.455
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 111.8 m
- To
- 112.3 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:111.8-112.3
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade (1.455 g/t) over a narrow width (0.5m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“1.455”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 2.684Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.684
- Grade Unit
- g/t
- Intercept
- 1.05 m
- True Width
- 0.84 m
- From
- 117.6 m
- To
- 118.65 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:117.6-118.65
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade (2.684 g/t) over a narrow width (1.05m) for an orogenic deposit, just above the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Narrow Intercepts
Evidence · table
“2.684”
Context: 1.05
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.84
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 5.18Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 5.18
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 118.15 m
- To
- 118.65 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:118.15-118.65
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade (5.18 g/t) over a narrow width (0.5m) for an orogenic deposit, exceeding the moderate threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Narrow Intercepts
Evidence · table
“5.18”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.654Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.654
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 143.9 m
- To
- 144.4 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:143.9-144.4
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.654 g/t) over a narrow width (0.5m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.654”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.533Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.533
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 148.7 m
- To
- 149.2 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:148.7-149.2
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.533 g/t) over a narrow width (0.5m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.533”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.595Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.595
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 166 m
- To
- 166.5 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:166-166.5
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.595 g/t) over a narrow width (0.5m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.595”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 2.3Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.3
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 168 m
- To
- 168.5 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:168-168.5
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (2.3 g/t) over a narrow width (0.5m) for an orogenic deposit, falling below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“2.300”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.45Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.45
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 216.6 m
- To
- 217.1 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:216.6-217.1
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.45 g/t) over a narrow width (0.5m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.450”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.313Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.313
- Grade Unit
- g/t
- Intercept
- 0.7 m
- True Width
- 0.56 m
- From
- 222 m
- To
- 222.7 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:222-222.7
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.313 g/t) over a narrow width (0.7m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.313”
Context: 0.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.56
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.559Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.559
- Grade Unit
- g/t
- Intercept
- 0.6 m
- True Width
- 0.48 m
- From
- 253.8 m
- To
- 254.4 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:253.8-254.4
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.559 g/t) over a narrow width (0.6m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.559”
Context: 0.60
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.48
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.494Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.494
- Grade Unit
- g/t
- Intercept
- 3 m
- True Width
- 2.4 m
- From
- 304 m
- To
- 307 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:304-307
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.494 g/t) over a narrow width (3.0m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.494”
Context: 3.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 1.34Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.34
- Grade Unit
- g/t
- Intercept
- 1 m
- True Width
- 0.8 m
- From
- 304 m
- To
- 305 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:304-305
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade (1.34 g/t) over a narrow width (1.0m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“1.340”
Context: 1.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.394Grade Unit: g/tIntercept: 1.15 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.394
- Grade Unit
- g/t
- Intercept
- 1.15 m
- True Width
- 0.92 m
- From
- 310.7 m
- To
- 311.85 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:310.7-311.85
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.394 g/t) over a narrow width (1.15m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.394”
Context: 1.15
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.92
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.771Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.771
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 311.35 m
- To
- 311.85 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:311.35-311.85
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade (0.771 g/t) over a narrow width (0.5m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.771”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.792Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.792
- Grade Unit
- g/t
- Intercept
- 1.1 m
- True Width
- 0.88 m
- From
- 322.9 m
- To
- 324 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:322.9-324
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.792 g/t) over a narrow width (1.1m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.792”
Context: 1.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.88
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.33Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.33
- Grade Unit
- g/t
- Intercept
- 0.8 m
- True Width
- 0.64 m
- From
- 366.5 m
- To
- 367.3 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:366.5-367.3
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.33 g/t) over a narrow width (0.8m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.330”
Context: 0.80
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.64
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 1.625Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.625
- Grade Unit
- g/t
- Intercept
- 1.1 m
- True Width
- 0.88 m
- From
- 454.4 m
- To
- 455.5 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:454.4-455.5
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (1.625 g/t) over a narrow width (1.1m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“1.625”
Context: 1.10
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.88
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LME25-062Ishkõday · goldGrade: 0.815Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LME25-062
- Project
- Ishkõday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.815
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 564.9 m
- To
- 565.4 m
- Hole Depth
- 624 m
- Intercept Depth
- 20.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- LME25-062:564.9-565.4
- Mining Method
- underground
Location
- Azimuth
- 160 °
- Dip
- -50 °
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2025-11-04T00:00:00.000Z
Reasoning: This intercept shows a low gold grade (0.815 g/t) over a narrow width (0.5m) for an orogenic deposit, falling well below the weak threshold for underground mining. True width is estimated, and QA/QC is disclosed.
Positive factors
- True Width Disclosed
- QA/QC Disclosed
- QP Signed
Negative factors
- Low Grades for Deposit Type
- Narrow Intercepts
Evidence · table
“0.815”
Context: 0.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.