ANX: Mons Cupri Infill Drilling Produces Bonanza Grades

Original announcement by asx on

Company
Anax Metals Limited
Ticker
ANX
Exchange
ASX
Region
Northwestern Pilbara Region, Western Australia
Primary commodity
Copper
Secondary commodities
Zinc, Lead, Silver, Gold
Document categories
Drill results, Resource update
Extracted
2026-09-23 00:30:21 UTC

Analysis by Minestarters Atlas

Atlas analysis published:

Minestarters Atlas analysis

Summary

Anax Metals Limited announced exceptional high-grade copper equivalent drill results from infill drilling at its Mons Cupri deposit in Western Australia, including 85.90m at 2.89% CuEq and 62.54m at 2.95% CuEq. These near-surface results, with high-grade zones exceeding 8% CuEq, reaffirm the quality of the Mons Cupri Resource and will support metallurgical testwork, pit design refinement, and project financing efforts. The drilling is part of a program to update reserves following a recently announced 24% increase in the resource.

Reasoning: Anax Metals reported exceptional high-grade copper equivalent results from infill drilling at Mons Cupri, confirming near-surface mineralization and providing strong support for the existing resource model and future reserve update, despite the lack of true width disclosure.

Positive factors

  • Exceptional high-grade copper equivalent intercepts
  • Near-surface mineralization confirmed
  • Supports existing Mineral Resource Estimate and future reserve update
  • Detailed QA/QC disclosure and JORC compliance
  • Polymetallic nature with significant byproduct credits

Negative factors

  • True widths not determined for reported intercepts
  • Infill drilling has lower novelty than new discovery

Facts used in scoring: 90

Classification and evidence

Bonanza Interceptpositive

Exceptionally high-grade zone, well above the deposit-type norm.

Why it applies: The document highlights 'bonanza grades' and reports several high-grade sub-intervals, such as 4.70m at 8.34% CuEq and 17.50m at 8.37% CuEq, which are well above typical VMS deposit grades.

Evidence · text

“MONS CUPRI INFILL DRILLING PRODUCES BONANZA GRADES”

Apparent Width Onlynegative

Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: The document explicitly states that 'intercept widths are downhole; true widths not determined'.

Evidence · text

“Note, intercept widths are downhole; true widths not determined.”

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: The release includes extensive JORC tables detailing sampling techniques, laboratory analysis, and verification procedures, and mentions routine submission of blanks, standards, and duplicates.

Evidence · text

“Section 1 Sampling Techniques and Data”

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: The document clearly states the compositing parameters: '0.50% CuEq lower cut-off, maximum 3m internal dilution' and 'High-grade including intervals have a 2.0% Cu or 2.0% Zn lower cut off'.

Evidence · text

“Reporting basis: 0.50% CuEq lower cut-off, maximum 3m internal dilution. Widths are downhole; true widths not determined.”

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: The document explicitly states the drilling is for 'infill purposes' and 'infill drilling supports metallurgical testwork and refinement of the base-of-pit design'.

Evidence · text

“Infill drilling supports metallurgical testwork and refinement of the base-of-pit design”

JORC Compliantpositive

Resource estimate prepared in compliance with JORC Code (Australia) — high reporting standard.

Why it applies: The Competent Person's Statement confirms that the information is based on and reflects information compiled by a Competent Person as defined in the JORC Code (2012 Edition).

Evidence · text

“to qualify as a Competent Person as defined in the JORC Code (2012 Edition).”

QP/CP Signedpositive

Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.

Why it applies: Mr Nicholas Jolly, a Member of the Australian Institute of Geoscientists (AIG), is named as the Competent Person and consents to the disclosure of the information.

Evidence · text

“Mr Nicholas Jolly, a Competent Person who is a Non-Executive Director and shareholder of Anax Metals Limited, and a Member of the Australian Institute of Geoscientists (AIG).”

VMS Depositneutral · Story-specific tag

No canonical definition is currently available.

Why it applies: The geology section explicitly states: 'The mineralisation at the Whim Creek Project is interpreted to be of the Volcanogenic Massive Sulphide (VMS) style'.

Evidence · text

“The mineralisation at the Whim Creek Project is interpreted to be of the Volcanogenic Massive Sulphide (VMS) style.”

Extracted facts

Stored fact records: 90. Some facts used in scoring do not have a stored record.

Drill Results (90)

26ANXDD001Whim Creek · copperGrade: 2.89Grade Unit: %Intercept: 85.9 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
2.89
Grade Unit
%
Intercept
85.9 m
From
34.6 m
To
120.5 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:34.6-120.5
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Metal Eq. Grade
2.89
Metal Eq. Unit
% CuEq
Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: An exceptional copper equivalent grade of 2.89% over a significant downhole length of 85.90m from near-surface strongly supports the resource model and indicates high-grade mineralization.

Positive factors

  • Exceptional copper equivalent grade for VMS deposit
  • Significant intercept length
  • Near-surface mineralization
  • Supports resource model

Negative factors

  • Apparent width only

Evidence · table

“2.89”

Context: 85.90

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · zincGrade: 2.18Grade Unit: %Intercept: 85.9 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
2.18
Grade Unit
%
Intercept
85.9 m
From
34.6 m
To
120.5 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:34.6-120.5
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate zinc grade of 2.18% over a significant downhole length of 85.90m contributes to the overall polymetallic nature of the intercept.

Positive factors

  • Moderate zinc grade for VMS deposit
  • Significant intercept length

Negative factors

  • Apparent width only

Evidence · table

“2.18”

Context: 85.90

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · leadGrade: 0.79Grade Unit: %Intercept: 85.9 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.79
Grade Unit
%
Intercept
85.9 m
From
34.6 m
To
120.5 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:34.6-120.5
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak lead grade of 0.79% over 85.90m provides a minor contribution to the overall metal content of the intercept.

Positive factors

  • Lead contribution to polymetallic intercept

Negative factors

  • Weak lead grade for VMS deposit
  • Apparent width only

Evidence · table

“0.79”

Context: 85.90

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · silverGrade: 35.7Grade Unit: g/tIntercept: 85.9 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
35.7
Grade Unit
g/t
Intercept
85.9 m
From
34.6 m
To
120.5 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:34.6-120.5
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate silver grade of 35.7 g/t over 85.90m adds to the polymetallic value of the intercept.

Positive factors

  • Moderate silver grade for VMS deposit
  • Significant intercept length

Negative factors

  • Apparent width only

Evidence · table

“35.7”

Context: 85.90

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · goldGrade: 1.05Grade Unit: g/tIntercept: 85.9 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
1.05
Grade Unit
g/t
Intercept
85.9 m
From
34.6 m
To
120.5 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:34.6-120.5
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate gold grade of 1.05 g/t over 85.90m provides a valuable gold credit to the polymetallic intercept.

Positive factors

  • Moderate gold grade for VMS deposit
  • Significant intercept length

Negative factors

  • Apparent width only

Evidence · table

“1.05”

Context: 85.90

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · copperGrade: 8.34Grade Unit: %Intercept: 4.7 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
8.34
Grade Unit
%
Intercept
4.7 m
From
34.6 m
To
39.3 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:34.6-39.3
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Metal Eq. Grade
8.34
Metal Eq. Unit
% CuEq
Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Cu
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: An exceptional copper equivalent grade of 8.34% over 4.70m from near-surface represents a bonanza grade sub-interval, significantly enhancing the overall value of the intercept.

Positive factors

  • Exceptional copper equivalent grade for VMS deposit
  • High-grade sub-interval
  • Near-surface mineralization

Negative factors

  • Apparent width only

Evidence · table

“8.34”

Context: 4.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · zincGrade: 19.99Grade Unit: %Intercept: 4.7 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
19.99
Grade Unit
%
Intercept
4.7 m
From
34.6 m
To
39.3 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:34.6-39.3
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Zn
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: An exceptional zinc grade of 19.99% over 4.70m represents a bonanza grade sub-interval, significantly enhancing the overall value of the intercept.

Positive factors

  • Exceptional zinc grade for VMS deposit
  • High-grade sub-interval
  • Near-surface mineralization

Negative factors

  • Apparent width only

Evidence · table

“19.99”

Context: 4.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · leadGrade: 9.07Grade Unit: %Intercept: 4.7 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
9.07
Grade Unit
%
Intercept
4.7 m
From
34.6 m
To
39.3 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:34.6-39.3
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Zn
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A strong lead grade of 9.07% over 4.70m contributes significantly to the high-grade nature of this sub-interval.

Positive factors

  • Strong lead grade for VMS deposit
  • High-grade sub-interval

Negative factors

  • Apparent width only

Evidence · table

“9.07”

Context: 4.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · silverGrade: 174.5Grade Unit: g/tIntercept: 4.7 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
174.5
Grade Unit
g/t
Intercept
4.7 m
From
34.6 m
To
39.3 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:34.6-39.3
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Zn
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate silver grade of 174.5 g/t over 4.70m adds significant value to this high-grade sub-interval.

Positive factors

  • Moderate silver grade for VMS deposit
  • High-grade sub-interval

Negative factors

  • Apparent width only

Evidence · table

“174.5”

Context: 4.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · goldGrade: 0.54Grade Unit: g/tIntercept: 4.7 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.54
Grade Unit
g/t
Intercept
4.7 m
From
34.6 m
To
39.3 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:34.6-39.3
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Zn
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate gold grade of 0.54 g/t over 4.70m contributes to the overall metal content of this high-grade sub-interval.

Positive factors

  • Moderate gold grade for VMS deposit
  • High-grade sub-interval

Negative factors

  • Apparent width only

Evidence · table

“0.54”

Context: 4.70

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · copperGrade: 8.37Grade Unit: %Intercept: 17.5 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
8.37
Grade Unit
%
Intercept
17.5 m
From
39.3 m
To
56.8 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:39.3-56.8
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Metal Eq. Grade
8.37
Metal Eq. Unit
% CuEq
Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Cu
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: An exceptional copper equivalent grade of 8.37% over 17.50m represents a bonanza grade sub-interval, significantly enhancing the overall value of the intercept.

Positive factors

  • Exceptional copper equivalent grade for VMS deposit
  • High-grade sub-interval
  • Significant intercept length

Negative factors

  • Apparent width only

Evidence · table

“8.37”

Context: 17.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · zincGrade: 0.29Grade Unit: %Intercept: 17.5 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.29
Grade Unit
%
Intercept
17.5 m
From
39.3 m
To
56.8 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:39.3-56.8
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Cu
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak zinc grade of 0.29% over 17.50m provides a minor contribution to the overall metal content of this sub-interval.

Negative factors

  • Weak zinc grade for VMS deposit
  • Apparent width only

Evidence · table

“0.29”

Context: 17.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · leadGrade: 0.12Grade Unit: %Intercept: 17.5 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.12
Grade Unit
%
Intercept
17.5 m
From
39.3 m
To
56.8 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:39.3-56.8
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Cu
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak lead grade of 0.12% over 17.50m provides a minor contribution to the overall metal content of this sub-interval.

Negative factors

  • Weak lead grade for VMS deposit
  • Apparent width only

Evidence · table

“0.12”

Context: 17.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · silverGrade: 47.3Grade Unit: g/tIntercept: 17.5 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
47.3
Grade Unit
g/t
Intercept
17.5 m
From
39.3 m
To
56.8 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:39.3-56.8
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Cu
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate silver grade of 47.3 g/t over 17.50m adds to the polymetallic value of this sub-interval.

Positive factors

  • Moderate silver grade for VMS deposit
  • Significant intercept length

Negative factors

  • Apparent width only

Evidence · table

“47.3”

Context: 17.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · goldGrade: 4.75Grade Unit: g/tIntercept: 17.5 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
4.75
Grade Unit
g/t
Intercept
17.5 m
From
39.3 m
To
56.8 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:39.3-56.8
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Cu
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: An exceptional gold grade of 4.75 g/t over 17.50m represents a bonanza grade sub-interval, significantly enhancing the overall value of the intercept.

Positive factors

  • Exceptional gold grade for VMS deposit
  • High-grade sub-interval
  • Significant intercept length

Negative factors

  • Apparent width only

Evidence · table

“4.75”

Context: 17.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · copperGrade: 1.6Grade Unit: %Intercept: 8.5 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
1.6
Grade Unit
%
Intercept
8.5 m
From
112 m
To
120.5 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:112-120.5
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Metal Eq. Grade
1.6
Metal Eq. Unit
% CuEq
Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A strong copper equivalent grade of 1.60% over 8.50m contributes significantly to the overall metal content of this sub-interval.

Positive factors

  • Strong copper equivalent grade for VMS deposit
  • Significant intercept length

Negative factors

  • Apparent width only

Evidence · table

“1.60”

Context: 8.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · zincGrade: 5.13Grade Unit: %Intercept: 8.5 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
5.13
Grade Unit
%
Intercept
8.5 m
From
112 m
To
120.5 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:112-120.5
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate zinc grade of 5.13% over 8.50m contributes significantly to the overall metal content of this sub-interval.

Positive factors

  • Moderate zinc grade for VMS deposit
  • Significant intercept length

Negative factors

  • Apparent width only

Evidence · table

“5.13”

Context: 8.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · leadGrade: 1.03Grade Unit: %Intercept: 8.5 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
1.03
Grade Unit
%
Intercept
8.5 m
From
112 m
To
120.5 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:112-120.5
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak lead grade of 1.03% over 8.50m provides a minor contribution to the overall metal content of this sub-interval.

Positive factors

  • Lead contribution to polymetallic intercept

Negative factors

  • Weak lead grade for VMS deposit
  • Apparent width only

Evidence · table

“1.03”

Context: 8.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · silverGrade: 35.2Grade Unit: g/tIntercept: 8.5 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
35.2
Grade Unit
g/t
Intercept
8.5 m
From
112 m
To
120.5 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:112-120.5
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate silver grade of 35.2 g/t over 8.50m adds to the polymetallic value of this sub-interval.

Positive factors

  • Moderate silver grade for VMS deposit

Negative factors

  • Apparent width only

Evidence · table

“35.2”

Context: 8.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · goldGrade: 0.04Grade Unit: g/tIntercept: 8.5 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.04
Grade Unit
g/t
Intercept
8.5 m
From
112 m
To
120.5 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:112-120.5
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak gold grade of 0.04 g/t over 8.50m provides a minor contribution to the overall metal content of this sub-interval.

Negative factors

  • Weak gold grade for VMS deposit
  • Apparent width only

Evidence · table

“0.04”

Context: 8.50

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · copperGrade: 1.06Grade Unit: %Intercept: 18.55 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
1.06
Grade Unit
%
Intercept
18.55 m
From
145.45 m
To
164 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:145.45-164
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Metal Eq. Grade
1.06
Metal Eq. Unit
% CuEq
Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate copper equivalent grade of 1.06% over 18.55m contributes to the overall metal content of this sub-interval.

Positive factors

  • Moderate copper equivalent grade for VMS deposit
  • Significant intercept length

Negative factors

  • Apparent width only

Evidence · table

“1.06”

Context: 18.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · zincGrade: 0.07Grade Unit: %Intercept: 18.55 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.07
Grade Unit
%
Intercept
18.55 m
From
145.45 m
To
164 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:145.45-164
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak zinc grade of 0.07% over 18.55m provides a minor contribution to the overall metal content of this sub-interval.

Negative factors

  • Weak zinc grade for VMS deposit
  • Apparent width only

Evidence · table

“0.07”

Context: 18.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · leadGrade: 0.02Grade Unit: %Intercept: 18.55 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.02
Grade Unit
%
Intercept
18.55 m
From
145.45 m
To
164 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:145.45-164
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak lead grade of 0.02% over 18.55m provides a minor contribution to the overall metal content of this sub-interval.

Negative factors

  • Weak lead grade for VMS deposit
  • Apparent width only

Evidence · table

“0.02”

Context: 18.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · silverGrade: 3.7Grade Unit: g/tIntercept: 18.55 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
3.7
Grade Unit
g/t
Intercept
18.55 m
From
145.45 m
To
164 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:145.45-164
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak silver grade of 3.7 g/t over 18.55m provides a minor contribution to the overall metal content of this sub-interval.

Negative factors

  • Weak silver grade for VMS deposit
  • Apparent width only

Evidence · table

“3.7”

Context: 18.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD001Whim Creek · goldGrade: 0.09Grade Unit: g/tIntercept: 18.55 mView all details
Link to this fact

Identity

Hole ID
26ANXDD001
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.09
Grade Unit
g/t
Intercept
18.55 m
From
145.45 m
To
164 m
Hole Depth
190.1 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD001:145.45-164
Mining Method
open_pit

Location

Easting
583891
Northing
7690830
Elevation
86 m
Azimuth
291.7 °
Dip
-83.2 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak gold grade of 0.09 g/t over 18.55m provides a minor contribution to the overall metal content of this sub-interval.

Negative factors

  • Weak gold grade for VMS deposit
  • Apparent width only

Evidence · table

“0.09”

Context: 18.55

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD002Whim Creek · copperGrade: 0.81Grade Unit: %Intercept: 13 mView all details
Link to this fact

Identity

Hole ID
26ANXDD002
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.81
Grade Unit
%
Intercept
13 m
From
169 m
To
182 m
Hole Depth
210 m
Intercept Depth
169 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD002:169-182
Mining Method
open_pit

Location

Easting
583721
Northing
7690808
Elevation
76 m
Azimuth
55.4 °
Dip
-74.4 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Metal Eq. Grade
0.81
Metal Eq. Unit
% CuEq
Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate copper equivalent grade of 0.81% over 13.00m contributes to the overall metal content of this intercept.

Positive factors

  • Moderate copper equivalent grade for VMS deposit
  • Significant intercept length

Negative factors

  • Apparent width only

Evidence · table

“0.81”

Context: 13.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD002Whim Creek · zincGrade: 2.3Grade Unit: %Intercept: 13 mView all details
Link to this fact

Identity

Hole ID
26ANXDD002
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
2.3
Grade Unit
%
Intercept
13 m
From
169 m
To
182 m
Hole Depth
210 m
Intercept Depth
169 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD002:169-182
Mining Method
open_pit

Location

Easting
583721
Northing
7690808
Elevation
76 m
Azimuth
55.4 °
Dip
-74.4 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate zinc grade of 2.30% over 13.00m contributes to the overall metal content of this intercept.

Positive factors

  • Moderate zinc grade for VMS deposit

Negative factors

  • Apparent width only

Evidence · table

“2.30”

Context: 13.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD002Whim Creek · leadGrade: 0.75Grade Unit: %Intercept: 13 mView all details
Link to this fact

Identity

Hole ID
26ANXDD002
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.75
Grade Unit
%
Intercept
13 m
From
169 m
To
182 m
Hole Depth
210 m
Intercept Depth
169 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD002:169-182
Mining Method
open_pit

Location

Easting
583721
Northing
7690808
Elevation
76 m
Azimuth
55.4 °
Dip
-74.4 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak lead grade of 0.75% over 13.00m provides a minor contribution to the overall metal content of this intercept.

Positive factors

  • Lead contribution to polymetallic intercept

Negative factors

  • Weak lead grade for VMS deposit
  • Apparent width only

Evidence · table

“0.75”

Context: 13.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD002Whim Creek · silverGrade: 26.5Grade Unit: g/tIntercept: 13 mView all details
Link to this fact

Identity

Hole ID
26ANXDD002
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
26.5
Grade Unit
g/t
Intercept
13 m
From
169 m
To
182 m
Hole Depth
210 m
Intercept Depth
169 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD002:169-182
Mining Method
open_pit

Location

Easting
583721
Northing
7690808
Elevation
76 m
Azimuth
55.4 °
Dip
-74.4 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak silver grade of 26.5 g/t over 13.00m provides a minor contribution to the overall metal content of this intercept.

Positive factors

  • Silver contribution to polymetallic intercept

Negative factors

  • Weak silver grade for VMS deposit
  • Apparent width only

Evidence · table

“26.5”

Context: 13.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD002Whim Creek · goldGrade: 0.04Grade Unit: g/tIntercept: 13 mView all details
Link to this fact

Identity

Hole ID
26ANXDD002
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.04
Grade Unit
g/t
Intercept
13 m
From
169 m
To
182 m
Hole Depth
210 m
Intercept Depth
169 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD002:169-182
Mining Method
open_pit

Location

Easting
583721
Northing
7690808
Elevation
76 m
Azimuth
55.4 °
Dip
-74.4 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak gold grade of 0.04 g/t over 13.00m provides a minor contribution to the overall metal content of this intercept.

Negative factors

  • Weak gold grade for VMS deposit
  • Apparent width only

Evidence · table

“0.04”

Context: 13.00

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · copperGrade: 2.95Grade Unit: %Intercept: 62.54 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
2.95
Grade Unit
%
Intercept
62.54 m
From
107.32 m
To
169.86 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:107.32-169.86
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Metal Eq. Grade
2.95
Metal Eq. Unit
% CuEq
Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: An exceptional copper equivalent grade of 2.95% over a significant downhole length of 62.54m strongly supports the resource model and indicates high-grade mineralization.

Positive factors

  • Exceptional copper equivalent grade for VMS deposit
  • Significant intercept length
  • Supports resource model

Negative factors

  • Apparent width only

Evidence · table

“2.95”

Context: 62.54

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · zincGrade: 1.13Grade Unit: %Intercept: 62.54 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
1.13
Grade Unit
%
Intercept
62.54 m
From
107.32 m
To
169.86 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:107.32-169.86
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak zinc grade of 1.13% over 62.54m provides a minor contribution to the overall metal content of this intercept.

Positive factors

  • Zinc contribution to polymetallic intercept

Negative factors

  • Weak zinc grade for VMS deposit
  • Apparent width only

Evidence · table

“1.13”

Context: 62.54

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · leadGrade: 0.41Grade Unit: %Intercept: 62.54 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.41
Grade Unit
%
Intercept
62.54 m
From
107.32 m
To
169.86 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:107.32-169.86
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak lead grade of 0.41% over 62.54m provides a minor contribution to the overall metal content of this intercept.

Negative factors

  • Weak lead grade for VMS deposit
  • Apparent width only

Evidence · table

“0.41”

Context: 62.54

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · silverGrade: 16.1Grade Unit: g/tIntercept: 62.54 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
16.1
Grade Unit
g/t
Intercept
62.54 m
From
107.32 m
To
169.86 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:107.32-169.86
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak silver grade of 16.1 g/t over 62.54m provides a minor contribution to the overall metal content of this intercept.

Negative factors

  • Weak silver grade for VMS deposit
  • Apparent width only

Evidence · table

“16.1”

Context: 62.54

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · goldGrade: 1.46Grade Unit: g/tIntercept: 62.54 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
1.46
Grade Unit
g/t
Intercept
62.54 m
From
107.32 m
To
169.86 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:107.32-169.86
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A strong gold grade of 1.46 g/t over 62.54m provides a valuable gold credit to the polymetallic intercept.

Positive factors

  • Strong gold grade for VMS deposit
  • Significant intercept length

Negative factors

  • Apparent width only

Evidence · table

“1.46”

Context: 62.54

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · copperGrade: 5.46Grade Unit: %Intercept: 5.04 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
5.46
Grade Unit
%
Intercept
5.04 m
From
107.32 m
To
112.36 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:107.32-112.36
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Metal Eq. Grade
5.46
Metal Eq. Unit
% CuEq
Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Cu
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: An exceptional copper equivalent grade of 5.46% over 5.04m represents a bonanza grade sub-interval, significantly enhancing the overall value of the intercept.

Positive factors

  • Exceptional copper equivalent grade for VMS deposit
  • High-grade sub-interval

Negative factors

  • Apparent width only

Evidence · table

“5.46”

Context: 5.04

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · zincGrade: 9.8Grade Unit: %Intercept: 5.04 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
9.8
Grade Unit
%
Intercept
5.04 m
From
107.32 m
To
112.36 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:107.32-112.36
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Zn
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate zinc grade of 9.80% over 5.04m contributes significantly to the high-grade nature of this sub-interval.

Positive factors

  • Moderate zinc grade for VMS deposit
  • High-grade sub-interval

Negative factors

  • Apparent width only

Evidence · table

“9.80”

Context: 5.04

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · leadGrade: 3.54Grade Unit: %Intercept: 5.04 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
3.54
Grade Unit
%
Intercept
5.04 m
From
107.32 m
To
112.36 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:107.32-112.36
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Zn
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate lead grade of 3.54% over 5.04m contributes to the overall metal content of this high-grade sub-interval.

Positive factors

  • Moderate lead grade for VMS deposit
  • High-grade sub-interval

Negative factors

  • Apparent width only

Evidence · table

“3.54”

Context: 5.04

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · silverGrade: 69.8Grade Unit: g/tIntercept: 5.04 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
69.8
Grade Unit
g/t
Intercept
5.04 m
From
107.32 m
To
112.36 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:107.32-112.36
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Zn
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate silver grade of 69.8 g/t over 5.04m adds significant value to this high-grade sub-interval.

Positive factors

  • Moderate silver grade for VMS deposit
  • High-grade sub-interval

Negative factors

  • Apparent width only

Evidence · table

“69.8”

Context: 5.04

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · goldGrade: 0.49Grade Unit: g/tIntercept: 5.04 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.49
Grade Unit
g/t
Intercept
5.04 m
From
107.32 m
To
112.36 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:107.32-112.36
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Zn
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate gold grade of 0.49 g/t over 5.04m contributes to the overall metal content of this high-grade sub-interval.

Positive factors

  • Moderate gold grade for VMS deposit
  • High-grade sub-interval

Negative factors

  • Apparent width only

Evidence · table

“0.49”

Context: 5.04

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · copperGrade: 6.01Grade Unit: %Intercept: 18.98 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
6.01
Grade Unit
%
Intercept
18.98 m
From
112.36 m
To
131.34 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:112.36-131.34
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Metal Eq. Grade
6.01
Metal Eq. Unit
% CuEq
Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Cu
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: An exceptional copper equivalent grade of 6.01% over 18.98m represents a bonanza grade sub-interval, significantly enhancing the overall value of the intercept.

Positive factors

  • Exceptional copper equivalent grade for VMS deposit
  • High-grade sub-interval
  • Significant intercept length

Negative factors

  • Apparent width only

Evidence · table

“6.01”

Context: 18.98

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · zincGrade: 0.99Grade Unit: %Intercept: 18.98 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.99
Grade Unit
%
Intercept
18.98 m
From
112.36 m
To
131.34 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:112.36-131.34
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Cu
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak zinc grade of 0.99% over 18.98m provides a minor contribution to the overall metal content of this sub-interval.

Negative factors

  • Weak zinc grade for VMS deposit
  • Apparent width only

Evidence · table

“0.99”

Context: 18.98

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · leadGrade: 0.38Grade Unit: %Intercept: 18.98 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.38
Grade Unit
%
Intercept
18.98 m
From
112.36 m
To
131.34 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:112.36-131.34
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Cu
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak lead grade of 0.38% over 18.98m provides a minor contribution to the overall metal content of this sub-interval.

Negative factors

  • Weak lead grade for VMS deposit
  • Apparent width only

Evidence · table

“0.38”

Context: 18.98

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · silverGrade: 23.3Grade Unit: g/tIntercept: 18.98 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
23.3
Grade Unit
g/t
Intercept
18.98 m
From
112.36 m
To
131.34 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:112.36-131.34
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Cu
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak silver grade of 23.3 g/t over 18.98m provides a minor contribution to the overall metal content of this sub-interval.

Positive factors

  • Silver contribution to polymetallic intercept

Negative factors

  • Weak silver grade for VMS deposit
  • Apparent width only

Evidence · table

“23.3”

Context: 18.98

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD003Whim Creek · goldGrade: 4.52Grade Unit: g/tIntercept: 18.98 mView all details
Link to this fact

Identity

Hole ID
26ANXDD003
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
4.52
Grade Unit
g/t
Intercept
18.98 m
From
112.36 m
To
131.34 m
Hole Depth
200.91 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD003:112.36-131.34
Mining Method
open_pit

Location

Easting
583722
Northing
7690808
Elevation
78 m
Azimuth
56.8 °
Dip
-55 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
2
Cutoff Unit
% Cu
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: An exceptional gold grade of 4.52 g/t over 18.98m represents a bonanza grade sub-interval, significantly enhancing the overall value of the intercept.

Positive factors

  • Exceptional gold grade for VMS deposit
  • High-grade sub-interval
  • Significant intercept length

Negative factors

  • Apparent width only

Evidence · table

“4.52”

Context: 18.98

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD004Whim Creek · copperGrade: 3.48Grade Unit: %Intercept: 0.29 mView all details
Link to this fact

Identity

Hole ID
26ANXDD004
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
3.48
Grade Unit
%
Intercept
0.29 m
From
110.79 m
To
111.08 m
Hole Depth
380.8 m
Intercept Depth
110.79 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD004:110.79-111.08
Mining Method
open_pit

Location

Easting
583647
Northing
7690759
Elevation
71 m
Azimuth
44.2 °
Dip
-57.3 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Metal Eq. Grade
3.48
Metal Eq. Unit
% CuEq
Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: An exceptional copper equivalent grade of 3.48% over a very narrow 0.29m intercept represents a bonanza grade, significantly enhancing the overall value.

Positive factors

  • Exceptional copper equivalent grade for VMS deposit

Negative factors

  • Apparent width only
  • Very narrow intercept

Evidence · table

“3.48”

Context: 0.29

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD004Whim Creek · zincGrade: 6.34Grade Unit: %Intercept: 0.29 mView all details
Link to this fact

Identity

Hole ID
26ANXDD004
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
6.34
Grade Unit
%
Intercept
0.29 m
From
110.79 m
To
111.08 m
Hole Depth
380.8 m
Intercept Depth
110.79 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD004:110.79-111.08
Mining Method
open_pit

Location

Easting
583647
Northing
7690759
Elevation
71 m
Azimuth
44.2 °
Dip
-57.3 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate zinc grade of 6.34% over a very narrow 0.29m intercept contributes to the overall metal content.

Positive factors

  • Moderate zinc grade for VMS deposit

Negative factors

  • Apparent width only
  • Very narrow intercept

Evidence · table

“6.34”

Context: 0.29

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD004Whim Creek · leadGrade: 11.15Grade Unit: %Intercept: 0.29 mView all details
Link to this fact

Identity

Hole ID
26ANXDD004
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
11.15
Grade Unit
%
Intercept
0.29 m
From
110.79 m
To
111.08 m
Hole Depth
380.8 m
Intercept Depth
110.79 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD004:110.79-111.08
Mining Method
open_pit

Location

Easting
583647
Northing
7690759
Elevation
71 m
Azimuth
44.2 °
Dip
-57.3 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: An exceptional lead grade of 11.15% over a very narrow 0.29m intercept represents a bonanza grade, significantly enhancing the overall value.

Positive factors

  • Exceptional lead grade for VMS deposit

Negative factors

  • Apparent width only
  • Very narrow intercept

Evidence · table

“11.15”

Context: 0.29

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD004Whim Creek · silverGrade: 112Grade Unit: g/tIntercept: 0.29 mView all details
Link to this fact

Identity

Hole ID
26ANXDD004
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
112
Grade Unit
g/t
Intercept
0.29 m
From
110.79 m
To
111.08 m
Hole Depth
380.8 m
Intercept Depth
110.79 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD004:110.79-111.08
Mining Method
open_pit

Location

Easting
583647
Northing
7690759
Elevation
71 m
Azimuth
44.2 °
Dip
-57.3 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate silver grade of 112.0 g/t over a very narrow 0.29m intercept adds significant value to the overall metal content.

Positive factors

  • Moderate silver grade for VMS deposit

Negative factors

  • Apparent width only
  • Very narrow intercept

Evidence · table

“112.0”

Context: 0.29

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD004Whim Creek · goldGrade: 0.05Grade Unit: g/tIntercept: 0.29 mView all details
Link to this fact

Identity

Hole ID
26ANXDD004
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.05
Grade Unit
g/t
Intercept
0.29 m
From
110.79 m
To
111.08 m
Hole Depth
380.8 m
Intercept Depth
110.79 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD004:110.79-111.08
Mining Method
open_pit

Location

Easting
583647
Northing
7690759
Elevation
71 m
Azimuth
44.2 °
Dip
-57.3 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak gold grade of 0.05 g/t over a very narrow 0.29m intercept provides a minor contribution to the overall metal content.

Negative factors

  • Weak gold grade for VMS deposit
  • Apparent width only
  • Very narrow intercept

Evidence · table

“0.05”

Context: 0.29

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD004Whim Creek · copperGrade: 1.23Grade Unit: %Intercept: 1.59 mView all details
Link to this fact

Identity

Hole ID
26ANXDD004
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
1.23
Grade Unit
%
Intercept
1.59 m
From
326.25 m
To
327.84 m
Hole Depth
380.8 m
Intercept Depth
110.79 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD004:326.25-327.84
Mining Method
open_pit

Location

Easting
583647
Northing
7690759
Elevation
71 m
Azimuth
44.2 °
Dip
-57.3 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Metal Eq. Grade
1.23
Metal Eq. Unit
% CuEq
Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A moderate copper equivalent grade of 1.23% over a narrow 1.59m intercept contributes to the overall metal content.

Positive factors

  • Moderate copper equivalent grade for VMS deposit

Negative factors

  • Apparent width only
  • Narrow intercept

Evidence · table

“1.23”

Context: 1.59

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD004Whim Creek · zincGrade: 1.28Grade Unit: %Intercept: 1.59 mView all details
Link to this fact

Identity

Hole ID
26ANXDD004
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
1.28
Grade Unit
%
Intercept
1.59 m
From
326.25 m
To
327.84 m
Hole Depth
380.8 m
Intercept Depth
110.79 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD004:326.25-327.84
Mining Method
open_pit

Location

Easting
583647
Northing
7690759
Elevation
71 m
Azimuth
44.2 °
Dip
-57.3 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak zinc grade of 1.28% over a narrow 1.59m intercept provides a minor contribution to the overall metal content.

Positive factors

  • Zinc contribution to polymetallic intercept

Negative factors

  • Weak zinc grade for VMS deposit
  • Apparent width only
  • Narrow intercept

Evidence · table

“1.28”

Context: 1.59

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD004Whim Creek · leadGrade: 0.17Grade Unit: %Intercept: 1.59 mView all details
Link to this fact

Identity

Hole ID
26ANXDD004
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.17
Grade Unit
%
Intercept
1.59 m
From
326.25 m
To
327.84 m
Hole Depth
380.8 m
Intercept Depth
110.79 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD004:326.25-327.84
Mining Method
open_pit

Location

Easting
583647
Northing
7690759
Elevation
71 m
Azimuth
44.2 °
Dip
-57.3 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak lead grade of 0.17% over a narrow 1.59m intercept provides a minor contribution to the overall metal content.

Negative factors

  • Weak lead grade for VMS deposit
  • Apparent width only
  • Narrow intercept

Evidence · table

“0.17”

Context: 1.59

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD004Whim Creek · silverGrade: 12.6Grade Unit: g/tIntercept: 1.59 mView all details
Link to this fact

Identity

Hole ID
26ANXDD004
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
12.6
Grade Unit
g/t
Intercept
1.59 m
From
326.25 m
To
327.84 m
Hole Depth
380.8 m
Intercept Depth
110.79 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD004:326.25-327.84
Mining Method
open_pit

Location

Easting
583647
Northing
7690759
Elevation
71 m
Azimuth
44.2 °
Dip
-57.3 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak silver grade of 12.6 g/t over a narrow 1.59m intercept provides a minor contribution to the overall metal content.

Negative factors

  • Weak silver grade for VMS deposit
  • Apparent width only
  • Narrow intercept

Evidence · table

“12.6”

Context: 1.59

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

26ANXDD004Whim Creek · goldGrade: 0.04Grade Unit: g/tIntercept: 1.59 mView all details
Link to this fact

Identity

Hole ID
26ANXDD004
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.04
Grade Unit
g/t
Intercept
1.59 m
From
326.25 m
To
327.84 m
Hole Depth
380.8 m
Intercept Depth
110.79 m

Classification

Deposit Type
vms
Program
resource
Sample Type
drill
Group ID
26ANXDD004:326.25-327.84
Mining Method
open_pit

Location

Easting
583647
Northing
7690759
Elevation
71 m
Azimuth
44.2 °
Dip
-57.3 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Deleterious

Deleterious Flag
No

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Cutoff Grade
0.5
Cutoff Unit
% CuEq
Dilution Disclosed
Yes
Max Dilution
3 m

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: A weak gold grade of 0.04 g/t over a narrow 1.59m intercept provides a minor contribution to the overall metal content.

Negative factors

  • Weak gold grade for VMS deposit
  • Apparent width only
  • Narrow intercept

Evidence · table

“0.04”

Context: 1.59

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "resource"

inclWhim Creek · copperGrade: 1.54Grade Unit: %Intercept: 4.7 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
1.54
Grade Unit
%
Intercept
4.7 m
From
34.6 m
To
39.3 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:34.6-39.3
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 1.54 % copper is strong against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 7.2 %·m is below (grade alone is strong; the better of the two is used).

Positive factors

  • 1.54 % copper is strong on the vms deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.54”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · zincGrade: 19.99Grade Unit: %Intercept: 4.7 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
19.99
Grade Unit
%
Intercept
4.7 m
From
34.6 m
To
39.3 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:34.6-39.3
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 19.99 % zinc is exceptional against the default band [18, 10, 5, 2] %. Grade×width 94.0 %·m is moderate (grade alone is exceptional; the better of the two is used).

Positive factors

  • 19.99 % zinc is exceptional on the default band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“19.99”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · leadGrade: 9.07Grade Unit: %Intercept: 4.7 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
9.07
Grade Unit
%
Intercept
4.7 m
From
34.6 m
To
39.3 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:34.6-39.3
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 9.07 % lead is strong against the default band [10, 6, 3, 1] %. Grade×width 42.6 %·m is moderate (grade alone is strong; the better of the two is used).

Positive factors

  • 9.07 % lead is strong on the default band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“9.07”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · silverGrade: 174.5Grade Unit: g/tIntercept: 4.7 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
174.5
Grade Unit
g/t
Intercept
4.7 m
From
34.6 m
To
39.3 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:34.6-39.3
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 174.5 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 820.1 g/t·m is weak (grade alone is moderate; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“174.5”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · goldGrade: 0.54Grade Unit: g/tIntercept: 4.7 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.54
Grade Unit
g/t
Intercept
4.7 m
From
34.6 m
To
39.3 m
Intercept Depth
34.6 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:34.6-39.3
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.54 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.5 g/t·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.54”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · copperGrade: 4.74Grade Unit: %Intercept: 17.5 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
4.74
Grade Unit
%
Intercept
17.5 m
From
39.3 m
To
56.8 m
Intercept Depth
39.3 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:39.3-56.8
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 4.74 % copper is exceptional against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 83.0 %·m is moderate (grade alone is exceptional; the better of the two is used).

Positive factors

  • 4.74 % copper is exceptional on the vms deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“4.74”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · zincGrade: 0.29Grade Unit: %Intercept: 17.5 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.29
Grade Unit
%
Intercept
17.5 m
From
39.3 m
To
56.8 m
Intercept Depth
39.3 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:39.3-56.8
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.29 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 5.1 %·m is below.

Negative factors

  • 0.29 % zinc is below the weak threshold (2 %) on the default band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.29”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · leadGrade: 0.12Grade Unit: %Intercept: 17.5 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.12
Grade Unit
%
Intercept
17.5 m
From
39.3 m
To
56.8 m
Intercept Depth
39.3 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:39.3-56.8
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.12 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 2.1 %·m is below.

Negative factors

  • 0.12 % lead is below the weak threshold (1 %) on the default band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.12”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · silverGrade: 47.3Grade Unit: g/tIntercept: 17.5 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
47.3
Grade Unit
g/t
Intercept
17.5 m
From
39.3 m
To
56.8 m
Intercept Depth
39.3 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:39.3-56.8
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 47.3 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 827.8 g/t·m is weak.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“47.3”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · goldGrade: 4.75Grade Unit: g/tIntercept: 17.5 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
4.75
Grade Unit
g/t
Intercept
17.5 m
From
39.3 m
To
56.8 m
Intercept Depth
39.3 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:39.3-56.8
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 4.75 g/t gold is strong against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 83.1 g/t·m is moderate (grade alone is strong; the better of the two is used).

Positive factors

  • 4.75 g/t gold is strong on the open_pit mining band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“4.75”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · copperGrade: 0.15Grade Unit: %Intercept: 8.5 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.15
Grade Unit
%
Intercept
8.5 m
From
112 m
To
120.5 m
Intercept Depth
112 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:112-120.5
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.15 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 1.3 %·m is below.

Negative factors

  • 0.15 % copper is below the weak threshold (0.4 %) on the vms deposit band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.15”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · zincGrade: 5.13Grade Unit: %Intercept: 8.5 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
5.13
Grade Unit
%
Intercept
8.5 m
From
112 m
To
120.5 m
Intercept Depth
112 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:112-120.5
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 5.13 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 43.6 %·m is moderate.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“5.13”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · leadGrade: 1.03Grade Unit: %Intercept: 8.5 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
1.03
Grade Unit
%
Intercept
8.5 m
From
112 m
To
120.5 m
Intercept Depth
112 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:112-120.5
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 1.03 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 8.8 %·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.03”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · silverGrade: 35.2Grade Unit: g/tIntercept: 8.5 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
35.2
Grade Unit
g/t
Intercept
8.5 m
From
112 m
To
120.5 m
Intercept Depth
112 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:112-120.5
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 35.2 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 299.2 g/t·m is weak.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“35.2”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · goldGrade: 0.04Grade Unit: g/tIntercept: 8.5 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.04
Grade Unit
g/t
Intercept
8.5 m
From
112 m
To
120.5 m
Intercept Depth
112 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:112-120.5
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below.

Negative factors

  • 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.04”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

andWhim Creek · copperGrade: 0.94Grade Unit: %Intercept: 18.55 mView all details
Link to this fact

Identity

Hole ID
and
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.94
Grade Unit
%
Intercept
18.55 m
From
145.45 m
To
164 m
Intercept Depth
145.45 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
and:145.45-164
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.94 % copper is moderate against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 17.4 %·m is below (grade alone is moderate; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.94”

Context: and

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

andWhim Creek · zincGrade: 0.07Grade Unit: %Intercept: 18.55 mView all details
Link to this fact

Identity

Hole ID
and
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.07
Grade Unit
%
Intercept
18.55 m
From
145.45 m
To
164 m
Intercept Depth
145.45 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
and:145.45-164
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.07 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.3 %·m is below.

Negative factors

  • 0.07 % zinc is below the weak threshold (2 %) on the default band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.07”

Context: and

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

andWhim Creek · leadGrade: 0.02Grade Unit: %Intercept: 18.55 mView all details
Link to this fact

Identity

Hole ID
and
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.02
Grade Unit
%
Intercept
18.55 m
From
145.45 m
To
164 m
Intercept Depth
145.45 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
and:145.45-164
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.02 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.4 %·m is below.

Negative factors

  • 0.02 % lead is below the weak threshold (1 %) on the default band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.02”

Context: and

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

andWhim Creek · silverGrade: 3.7Grade Unit: g/tIntercept: 18.55 mView all details
Link to this fact

Identity

Hole ID
and
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
3.7
Grade Unit
g/t
Intercept
18.55 m
From
145.45 m
To
164 m
Intercept Depth
145.45 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
and:145.45-164
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 3.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 68.6 g/t·m is below.

Negative factors

  • 3.7 g/t silver is below the weak threshold (30 g/t) on the default band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“3.7”

Context: and

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

andWhim Creek · goldGrade: 0.09Grade Unit: g/tIntercept: 18.55 mView all details
Link to this fact

Identity

Hole ID
and
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.09
Grade Unit
g/t
Intercept
18.55 m
From
145.45 m
To
164 m
Intercept Depth
145.45 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
and:145.45-164
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.09 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.7 g/t·m is below.

Negative factors

  • 0.09 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.09”

Context: and

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · copperGrade: 2.22Grade Unit: %Intercept: 5.04 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
2.22
Grade Unit
%
Intercept
5.04 m
From
107.32 m
To
112.36 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:107.32-112.36
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 2.22 % copper is strong against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 11.2 %·m is below (grade alone is strong; the better of the two is used).

Positive factors

  • 2.22 % copper is strong on the vms deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“2.22”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · zincGrade: 9.8Grade Unit: %Intercept: 5.04 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
9.8
Grade Unit
%
Intercept
5.04 m
From
107.32 m
To
112.36 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:107.32-112.36
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 9.8 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 49.4 %·m is moderate.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“9.80”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · leadGrade: 3.54Grade Unit: %Intercept: 5.04 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
3.54
Grade Unit
%
Intercept
5.04 m
From
107.32 m
To
112.36 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:107.32-112.36
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 3.54 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 17.8 %·m is weak (grade alone is moderate; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“3.54”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · silverGrade: 69.8Grade Unit: g/tIntercept: 5.04 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
69.8
Grade Unit
g/t
Intercept
5.04 m
From
107.32 m
To
112.36 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:107.32-112.36
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 69.8 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 351.8 g/t·m is weak.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“69.8”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · goldGrade: 0.49Grade Unit: g/tIntercept: 5.04 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.49
Grade Unit
g/t
Intercept
5.04 m
From
107.32 m
To
112.36 m
Intercept Depth
107.32 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:107.32-112.36
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.49 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.5 g/t·m is below (grade alone is weak; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.49”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · copperGrade: 2.62Grade Unit: %Intercept: 18.98 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
2.62
Grade Unit
%
Intercept
18.98 m
From
112.36 m
To
131.34 m
Intercept Depth
112.36 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:112.36-131.34
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 2.62 % copper is exceptional against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 49.7 %·m is weak (grade alone is exceptional; the better of the two is used).

Positive factors

  • 2.62 % copper is exceptional on the vms deposit band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“2.62”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · zincGrade: 0.99Grade Unit: %Intercept: 18.98 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.99
Grade Unit
%
Intercept
18.98 m
From
112.36 m
To
131.34 m
Intercept Depth
112.36 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:112.36-131.34
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.99 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 18.8 %·m is weak (grade alone is below; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.99”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · leadGrade: 0.38Grade Unit: %Intercept: 18.98 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.38
Grade Unit
%
Intercept
18.98 m
From
112.36 m
To
131.34 m
Intercept Depth
112.36 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:112.36-131.34
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.38 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 7.2 %·m is below.

Negative factors

  • 0.38 % lead is below the weak threshold (1 %) on the default band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.38”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · silverGrade: 23.3Grade Unit: g/tIntercept: 18.98 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
23.3
Grade Unit
g/t
Intercept
18.98 m
From
112.36 m
To
131.34 m
Intercept Depth
112.36 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:112.36-131.34
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 23.3 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 442.2 g/t·m is weak (grade alone is below; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“23.3”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

inclWhim Creek · goldGrade: 4.52Grade Unit: g/tIntercept: 18.98 mView all details
Link to this fact

Identity

Hole ID
incl
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
4.52
Grade Unit
g/t
Intercept
18.98 m
From
112.36 m
To
131.34 m
Intercept Depth
112.36 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
incl:112.36-131.34
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 4.52 g/t gold is strong against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 85.8 g/t·m is moderate (grade alone is strong; the better of the two is used).

Positive factors

  • 4.52 g/t gold is strong on the open_pit mining band.

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“4.52”

Context: incl

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

andWhim Creek · copperGrade: 0.81Grade Unit: %Intercept: 1.59 mView all details
Link to this fact

Identity

Hole ID
and
Project
Whim Creek
Commodity
copper
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.81
Grade Unit
%
Intercept
1.59 m
From
326.25 m
To
327.84 m
Intercept Depth
326.25 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
and:326.25-327.84
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.81 % copper is moderate against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 1.3 %·m is below (grade alone is moderate; the better of the two is used).

Negative factors

  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.81”

Context: and

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

andWhim Creek · zincGrade: 1.28Grade Unit: %Intercept: 1.59 mView all details
Link to this fact

Identity

Hole ID
and
Project
Whim Creek
Commodity
zinc
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
1.28
Grade Unit
%
Intercept
1.59 m
From
326.25 m
To
327.84 m
Intercept Depth
326.25 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
and:326.25-327.84
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 1.28 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 2.0 %·m is below.

Negative factors

  • 1.28 % zinc is below the weak threshold (2 %) on the default band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.28”

Context: and

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

andWhim Creek · leadGrade: 0.17Grade Unit: %Intercept: 1.59 mView all details
Link to this fact

Identity

Hole ID
and
Project
Whim Creek
Commodity
lead
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.17
Grade Unit
%
Intercept
1.59 m
From
326.25 m
To
327.84 m
Intercept Depth
326.25 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
and:326.25-327.84
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.17 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.

Negative factors

  • 0.17 % lead is below the weak threshold (1 %) on the default band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.17”

Context: and

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

andWhim Creek · silverGrade: 12.6Grade Unit: g/tIntercept: 1.59 mView all details
Link to this fact

Identity

Hole ID
and
Project
Whim Creek
Commodity
silver
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
12.6
Grade Unit
g/t
Intercept
1.59 m
From
326.25 m
To
327.84 m
Intercept Depth
326.25 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
and:326.25-327.84
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 12.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 20.0 g/t·m is below.

Negative factors

  • 12.6 g/t silver is below the weak threshold (30 g/t) on the default band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“12.6”

Context: and

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

andWhim Creek · goldGrade: 0.04Grade Unit: g/tIntercept: 1.59 mView all details
Link to this fact

Identity

Hole ID
and
Project
Whim Creek
Commodity
gold
Region
australia_wa
Reported Region
australia_wa
Ticker
ANX

Geometry

Grade
0.04
Grade Unit
g/t
Intercept
1.59 m
From
326.25 m
To
327.84 m
Intercept Depth
326.25 m

Classification

Deposit Type
vms
Sample Type
drill
Group ID
and:326.25-327.84
Mining Method
open_pit

QA/QC

Laboratory
ALS
QA/QC Disclosed
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates, umpire

Metal Equivalent

Assumptions Disclosed
Yes

Compositing

Dilution Disclosed
Yes

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-22T00:00:00.000Z

Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.

Negative factors

  • 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
  • Scored from rubric bands during table expansion, not from document context.

Evidence · table

“0.04”

Context: and

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.