ALM: 76.7m at 0.34% Cu in Briggs Drilling
Original announcement by asx on
- Company
- Alma Metals Limited
- Ticker
- ALM
- Exchange
- ASX
- Region
- Queensland, Australia
- Primary commodity
- Copper
- Secondary commodities
- Molybdenum, Silver
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-22 00:33:13 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Alma Metals Limited announced drill results from hole 26BRD0042 at its Briggs Copper Project, returning 383.8m at 0.25% Cu from 10.2m, including a higher-grade zone of 76.7m at 0.34% Cu. These infill drilling results are consistent with the current Mineral Resource Estimate block model and support the conversion of Inferred Resources to the Indicated category, a key objective for the ongoing Pre-Feasibility Study. The company plans further infill and exploration drilling to expand the resource and test new targets.
Reasoning: Drill hole 26BRD0042 returned a significant copper intercept, including a higher-grade zone, which is consistent with the existing MRE and supports the ongoing infill drilling program aimed at upgrading resources for a Pre-Feasibility Study. The results confirm geological continuity and are backed by robust QA/QC.
Positive factors
- Long intercept with good copper grade for a porphyry deposit
- Confirms continuity of higher-grade mineralization along intrusive contact
- Supports conversion of Inferred to Indicated resources for Pre-Feasibility Study
- Consistent with existing Mineral Resource Estimate block model
- Near-surface mineralization
- Detailed QA/QC procedures disclosed
- Competent Person sign-off
Negative factors
- Downhole intersections may not reflect true widths
Facts used in scoring: 36
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure in JORC Table 1, Section 1, mentioning ALS Laboratories, commercial standards, blanks, and duplicates, and a Competent Person sign-off.
Evidence · text
“Quality control was assessed for this batch of assays, and all results were considered within acceptable limits.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: The cut-off grades (0.1%Cu, 0.2%Cu, 0.3%Cu) and maximum internal dilution (4m) used for reporting intervals are clearly stated in the notes to Table 1.
Evidence · text
“Significant results reported at 0.1%Cu, 0.2%Cu & 0.3%Cu cut-off grade. Significant intervals reported are >10m with a nominal maximum internal dilution of 4m.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drilling program is explicitly described as 'infill drill hole' and 'infill drilling program' designed to 'convert Inferred Resources to the Indicated category'.
Evidence · text
“Assay results received for infill drill hole 26BRD0042 on northern side of mineral resource estimate (MRE) at Briggs:”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'Downhole intersections may not reflect true widths', indicating that only apparent widths are reported without true width estimates.
Evidence · text
“Downhole intersections may not reflect true widths.”
Extracted facts
Stored fact records: 36. Some facts used in scoring do not have a stored record.
Drill Results (36)
26BRD0042Briggs · copperGrade: 0.25Grade Unit: %Intercept: 383.8 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 383.8 m
- From
- 10.2 m
- To
- 394 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:10.2-394
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This very long, near-surface copper intercept is significant for a porphyry deposit and contributes to the resource conversion efforts for the Pre-Feasibility Study.
Positive factors
- Very long intercept for a porphyry copper deposit
- Near-surface mineralization
- Supports resource conversion for PFS
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“0.25”
Context: 383.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · molybdenumGrade: 26Grade Unit: ppmIntercept: 383.8 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- molybdenum
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 26
- Grade Unit
- ppm
- Intercept
- 383.8 m
- From
- 10.2 m
- To
- 394 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:10.2-394
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The molybdenum credits over a long intercept add potential byproduct value to the copper mineralization, supporting future evaluation of a molybdenum circuit.
Positive factors
- Long intercept with molybdenum credits
- Supports potential for molybdenum revenue streams
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“26”
Context: 383.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · silverGrade: 0.7Grade Unit: ppmIntercept: 383.8 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.7
- Grade Unit
- ppm
- Intercept
- 383.8 m
- From
- 10.2 m
- To
- 394 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:10.2-394
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The presence of silver credits over a long intercept adds minor byproduct potential to the overall project economics.
Positive factors
- Long intercept with silver credits
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“0.70”
Context: 383.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · copperGrade: 0.31Grade Unit: %Intercept: 131 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 131 m
- From
- 130 m
- To
- 261 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:130-261
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This long, higher-grade copper intercept contributes positively to the resource conversion efforts for the Pre-Feasibility Study.
Positive factors
- Long intercept with good copper grade for a porphyry deposit
- Supports resource conversion for PFS
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“0.31”
Context: 131.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · molybdenumGrade: 21Grade Unit: ppmIntercept: 131 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- molybdenum
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 21
- Grade Unit
- ppm
- Intercept
- 131 m
- From
- 130 m
- To
- 261 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:130-261
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The molybdenum credits over a long intercept add potential byproduct value to the copper mineralization.
Positive factors
- Long intercept with molybdenum credits
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“21”
Context: 131.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · silverGrade: 0.81Grade Unit: ppmIntercept: 131 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.81
- Grade Unit
- ppm
- Intercept
- 131 m
- From
- 130 m
- To
- 261 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:130-261
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The presence of silver credits over a long intercept adds minor byproduct potential.
Positive factors
- Long intercept with silver credits
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“0.81”
Context: 131.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · copperGrade: 0.34Grade Unit: %Intercept: 76.7 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 76.7 m
- From
- 146.3 m
- To
- 223 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:146.3-223
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This significant higher-grade copper intercept confirms the continuity of a key mineralized zone, which is crucial for upgrading resources and advancing the Pre-Feasibility Study.
Positive factors
- Good copper grade for a porphyry deposit
- Significant intercept length
- Confirms higher-grade zone continuity
- Supports resource conversion for PFS
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“0.34”
Context: 76.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · molybdenumGrade: 23Grade Unit: ppmIntercept: 76.7 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- molybdenum
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 23
- Grade Unit
- ppm
- Intercept
- 76.7 m
- From
- 146.3 m
- To
- 223 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:146.3-223
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The molybdenum credits over this intercept add potential byproduct value to the copper mineralization.
Positive factors
- Molybdenum credits over a significant intercept
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“23”
Context: 76.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · silverGrade: 0.83Grade Unit: ppmIntercept: 76.7 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.83
- Grade Unit
- ppm
- Intercept
- 76.7 m
- From
- 146.3 m
- To
- 223 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:146.3-223
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The presence of silver credits over this intercept adds minor byproduct potential.
Positive factors
- Silver credits over a significant intercept
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“0.83”
Context: 76.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · copperGrade: 0.31Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 20 m
- From
- 269 m
- To
- 289 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:269-289
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This intercept provides additional data for resource definition within the Briggs porphyry copper project.
Positive factors
- Good copper grade for a porphyry deposit
- Contributes to resource definition
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“0.31”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · molybdenumGrade: 59Grade Unit: ppmIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- molybdenum
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 59
- Grade Unit
- ppm
- Intercept
- 20 m
- From
- 269 m
- To
- 289 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:269-289
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This interval shows a relatively higher molybdenum grade, enhancing the potential byproduct value of the mineralization.
Positive factors
- Higher molybdenum grade for this interval
- Adds potential byproduct value
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“59”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · silverGrade: 0.82Grade Unit: ppmIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.82
- Grade Unit
- ppm
- Intercept
- 20 m
- From
- 269 m
- To
- 289 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:269-289
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The presence of silver credits over this intercept adds minor byproduct potential.
Positive factors
- Silver credits over this intercept
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“0.82”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · copperGrade: 0.28Grade Unit: %Intercept: 72.45 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 72.45 m
- From
- 315 m
- To
- 387.45 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:315-387.45
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This significant copper intercept provides valuable data for resource definition within the Briggs porphyry copper project.
Positive factors
- Good copper grade for a porphyry deposit
- Significant intercept length
- Contributes to resource definition
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“0.28”
Context: 72.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · molybdenumGrade: 43Grade Unit: ppmIntercept: 72.45 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- molybdenum
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 43
- Grade Unit
- ppm
- Intercept
- 72.45 m
- From
- 315 m
- To
- 387.45 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:315-387.45
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The molybdenum credits over this intercept add potential byproduct value to the copper mineralization.
Positive factors
- Molybdenum credits over a significant intercept
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“43”
Context: 72.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · silverGrade: 0.8Grade Unit: ppmIntercept: 72.45 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.8
- Grade Unit
- ppm
- Intercept
- 72.45 m
- From
- 315 m
- To
- 387.45 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:315-387.45
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The presence of silver credits over this intercept adds minor byproduct potential.
Positive factors
- Silver credits over a significant intercept
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“0.8”
Context: 72.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · copperGrade: 0.38Grade Unit: %Intercept: 14 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.38
- Grade Unit
- %
- Intercept
- 14 m
- From
- 371 m
- To
- 385 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:371-385
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: This interval shows a higher copper grade, which is positive for the overall resource definition and potential economic viability.
Positive factors
- Higher copper grade for this interval
- Contributes to resource definition
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“0.38”
Context: 14.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · molybdenumGrade: 35Grade Unit: ppmIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- molybdenum
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 35
- Grade Unit
- ppm
- Intercept
- 14 m
- From
- 371 m
- To
- 385 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:371-385
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The molybdenum credits over this interval add potential byproduct value to the copper mineralization.
Positive factors
- Molybdenum credits over this interval
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“35”
Context: 14.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042Briggs · silverGrade: 1.13Grade Unit: ppmIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042
- Project
- Briggs
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 1.13
- Grade Unit
- ppm
- Intercept
- 14 m
- From
- 371 m
- To
- 385 m
- Hole Depth
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- 26BRD0042:371-385
- Mining Method
- open_pit
Location
- Easting
- 268714
- Northing
- 7345223
- Elevation
- 189 m
- Azimuth
- 5 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- % Cu
- Dilution Disclosed
- Yes
- Max Dilution
- 4 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: The presence of silver credits over this interval adds minor byproduct potential.
Positive factors
- Silver credits over this interval
Negative factors
- Downhole intersection may not reflect true width
Evidence · table
“1.13”
Context: 14.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
26BRD0042*Briggs · copperGrade: 0.25Grade Unit: %Intercept: 383.8 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042*
- Project
- Briggs
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 383.8 m
- From
- 10.2 m
- To
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- 26BRD0042*:10.2-394
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.25 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 96.0 %·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.25”
Context: 26BRD0042*
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
26BRD0042*Briggs · molybdenumGrade: 26Grade Unit: ppmIntercept: 383.8 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042*
- Project
- Briggs
- Commodity
- molybdenum
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 26
- Grade Unit
- ppm
- Intercept
- 383.8 m
- From
- 10.2 m
- To
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- 26BRD0042*:10.2-394
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 26 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“26”
Context: 26BRD0042*
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
26BRD0042*Briggs · silverGrade: 0.7Grade Unit: ppmIntercept: 383.8 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042*
- Project
- Briggs
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.7
- Grade Unit
- ppm
- Intercept
- 383.8 m
- From
- 10.2 m
- To
- 394 m
- Intercept Depth
- 10.2 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- 26BRD0042*:10.2-394
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.7 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.70”
Context: 26BRD0042*
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
26BRD0042*Briggs · copperGrade: 0.31Grade Unit: %Intercept: 131 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042*
- Project
- Briggs
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 131 m
- From
- 130 m
- To
- 261 m
- Intercept Depth
- 130 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- 26BRD0042*:130-261
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.31 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 40.6 %·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.31”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
26BRD0042*Briggs · molybdenumGrade: 21Grade Unit: ppmIntercept: 131 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042*
- Project
- Briggs
- Commodity
- molybdenum
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 21
- Grade Unit
- ppm
- Intercept
- 131 m
- From
- 130 m
- To
- 261 m
- Intercept Depth
- 130 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- 26BRD0042*:130-261
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 21 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“21”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
26BRD0042*Briggs · silverGrade: 0.81Grade Unit: ppmIntercept: 131 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042*
- Project
- Briggs
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.81
- Grade Unit
- ppm
- Intercept
- 131 m
- From
- 130 m
- To
- 261 m
- Intercept Depth
- 130 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- 26BRD0042*:130-261
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.81 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.81”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
26BRD0042*Briggs · copperGrade: 0.34Grade Unit: %Intercept: 76.7 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042*
- Project
- Briggs
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 76.7 m
- From
- 146.3 m
- To
- 223 m
- Intercept Depth
- 146.3 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- 26BRD0042*:146.3-223
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.34 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 26.1 %·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.34”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
26BRD0042*Briggs · molybdenumGrade: 23Grade Unit: ppmIntercept: 76.7 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042*
- Project
- Briggs
- Commodity
- molybdenum
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 23
- Grade Unit
- ppm
- Intercept
- 76.7 m
- From
- 146.3 m
- To
- 223 m
- Intercept Depth
- 146.3 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- 26BRD0042*:146.3-223
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 23 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“23”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
26BRD0042*Briggs · silverGrade: 0.83Grade Unit: ppmIntercept: 76.7 mView all detailsHide details
Identity
- Hole ID
- 26BRD0042*
- Project
- Briggs
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.83
- Grade Unit
- ppm
- Intercept
- 76.7 m
- From
- 146.3 m
- To
- 223 m
- Intercept Depth
- 146.3 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- 26BRD0042*:146.3-223
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.83 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.83”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andBriggs · copperGrade: 0.31Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Briggs
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 20 m
- From
- 269 m
- To
- 289 m
- Intercept Depth
- 269 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:269-289
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.31 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 6.2 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.31”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andBriggs · molybdenumGrade: 59Grade Unit: ppmIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Briggs
- Commodity
- molybdenum
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 59
- Grade Unit
- ppm
- Intercept
- 20 m
- From
- 269 m
- To
- 289 m
- Intercept Depth
- 269 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:269-289
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 59 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“59”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andBriggs · silverGrade: 0.82Grade Unit: ppmIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Briggs
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.82
- Grade Unit
- ppm
- Intercept
- 20 m
- From
- 269 m
- To
- 289 m
- Intercept Depth
- 269 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:269-289
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.82 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.82”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andBriggs · copperGrade: 0.28Grade Unit: %Intercept: 72.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Briggs
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 72.45 m
- From
- 315 m
- To
- 387.45 m
- Intercept Depth
- 315 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:315-387.45
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.28 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 20.3 %·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.28”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andBriggs · molybdenumGrade: 43Grade Unit: ppmIntercept: 72.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Briggs
- Commodity
- molybdenum
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 43
- Grade Unit
- ppm
- Intercept
- 72.45 m
- From
- 315 m
- To
- 387.45 m
- Intercept Depth
- 315 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:315-387.45
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 43 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“43”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andBriggs · silverGrade: 0.8Grade Unit: ppmIntercept: 72.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Briggs
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.8
- Grade Unit
- ppm
- Intercept
- 72.45 m
- From
- 315 m
- To
- 387.45 m
- Intercept Depth
- 315 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:315-387.45
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 0.8 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.8”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andBriggs · copperGrade: 0.38Grade Unit: %Intercept: 14 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Briggs
- Commodity
- copper
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 0.38
- Grade Unit
- %
- Intercept
- 14 m
- From
- 371 m
- To
- 385 m
- Intercept Depth
- 371 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:371-385
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table. 0.38 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 5.3 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.38”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andBriggs · molybdenumGrade: 35Grade Unit: ppmIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Briggs
- Commodity
- molybdenum
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 35
- Grade Unit
- ppm
- Intercept
- 14 m
- From
- 371 m
- To
- 385 m
- Intercept Depth
- 371 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:371-385
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 35 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“35”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andBriggs · silverGrade: 1.13Grade Unit: ppmIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Briggs
- Commodity
- silver
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- ALM
Geometry
- Grade
- 1.13
- Grade Unit
- ppm
- Intercept
- 14 m
- From
- 371 m
- To
- 385 m
- Intercept Depth
- 371 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- and:371-385
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-21T00:00:00.000Z
Reasoning: Expanded from assay table: 1.13 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“1.13”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.