Abitibi Metals Intersects 3.72% CuEq over 9.2 m Within a Broader 1.25% CuEq over 60.2 m at the B26 Deposit
Original announcement by newsfile on
- Company
- Abitibi Metals Corp.
- Ticker
- AMQ
- Exchange
- Unavailable
- Region
- Québec
- Primary commodity
- Copper
- Secondary commodities
- Gold, Silver, Zinc
- Document categories
- Drill results
- Extracted
- 2026-09-17 11:06:41 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Abitibi Metals Corp. reported strong drill results from its B26 Polymetallic Deposit in Québec, highlighted by an intercept of 3.72% CuEq over 9.2 meters within a broader 60.2 meters at 1.25% CuEq. The drilling successfully expanded the Western Down-Plunge Zone, confirming high-grade mineralization and continuity. These results are anticipated to support a future resource update for the project.
Reasoning: The drill results from the B26 Polymetallic Deposit show multiple wide and high-grade copper-gold-silver-zinc intercepts, significantly expanding the Western Down-Plunge Zone and confirming strong grade continuity. The headline intercept of 3.72% CuEq over 9.2 m within a broader 60.2 m at 1.25% CuEq is exceptional, and the provision of true width estimates and detailed QA/QC enhances confidence. These results are expected to contribute to a future resource update, de-risking the project.
Positive factors
- High-grade copper-gold intercepts, particularly 3.72% CuEq over 9.2 m, demonstrate strong mineralization.
- Significant intercept widths, such as 60.2 m at 1.25% CuEq, indicate bulk tonnage potential.
- Drilling confirms continuity and expands the Western Down-Plunge Zone, supporting future resource growth.
- True width estimates are provided for all intercepts, enhancing geological confidence.
- Comprehensive QA/QC procedures are disclosed, including laboratory details and methods.
Negative factors
- Some elements (boron, arsenic, mercury) show poor recovery due to volatilization, indicating potential metallurgical challenges.
- The maximum internal dilution in meters is not explicitly stated, only as 'up to three consecutive samples below cut-off grade'.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 100
Extracted facts
Stored fact records: 100. Some facts used in scoring do not have a stored record.
Drill Results (100)
1274-24-342-W1B26 Polymetallic Deposit · copperGrade: 2.6Grade Unit: %Intercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 1274-24-342-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 2.6
- Grade Unit
- %
- Intercept
- 2 m
- True Width
- 1.2 m
- From
- 1404.5 m
- To
- 1406.5 m
- Hole Depth
- 1609 m
- Intercept Depth
- 1404.5 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-24-342-W1:1404.5-1406.5
- Mining Method
- underground
Location
- Easting
- 652368
- Northing
- 5513881
- Elevation
- 272 m
- Azimuth
- 215 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 2.6
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows exceptional copper equivalent grade over a narrow width, confirming deep mineralization continuity with true width provided.
Positive factors
- Copper equivalent grade of 2.6% is exceptional for a VMS deposit.
- True width of 1.2 m is provided, adding confidence to the intercept geometry.
- Confirms down-dip continuity of the mineralized system at significant depth.
Negative factors
- Intercept length of 2.0 m is narrow.
Evidence · table
“2.6”
Context: 2.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-24-342-W1B26 Polymetallic Deposit · goldGrade: 0.1Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 1274-24-342-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 1.2 m
- From
- 1404.5 m
- To
- 1406.5 m
- Hole Depth
- 1609 m
- Intercept Depth
- 1404.5 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-24-342-W1:1404.5-1406.5
- Mining Method
- underground
Location
- Easting
- 652368
- Northing
- 5513881
- Elevation
- 272 m
- Azimuth
- 215 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 2.5
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low gold grade over a narrow width, but contributes to confirming deep mineralization continuity.
Positive factors
- True width of 1.2 m is provided, adding confidence to the intercept geometry.
- Confirms down-dip continuity of the mineralized system at significant depth.
Negative factors
- Gold grade of 0.1 g/t is below the weak threshold for gold.
- Intercept length of 2.0 m is narrow.
Evidence · table
“0.1”
Context: 2.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-24-342-W1B26 Polymetallic Deposit · silverGrade: 2.7Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 1274-24-342-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 2.7
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 1.2 m
- From
- 1404.5 m
- To
- 1406.5 m
- Hole Depth
- 1609 m
- Intercept Depth
- 1404.5 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-24-342-W1:1404.5-1406.5
- Mining Method
- underground
Location
- Easting
- 652368
- Northing
- 5513881
- Elevation
- 272 m
- Azimuth
- 215 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 2.5
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade over a narrow width, but contributes to confirming deep mineralization continuity.
Positive factors
- True width of 1.2 m is provided, adding confidence to the intercept geometry.
- Confirms down-dip continuity of the mineralized system at significant depth.
Negative factors
- Silver grade of 2.7 g/t is very low.
- Intercept length of 2.0 m is narrow.
Evidence · table
“2.7”
Context: 2.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-24-342-W1B26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 1274-24-342-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2 m
- True Width
- 1.2 m
- From
- 1404.5 m
- To
- 1406.5 m
- Hole Depth
- 1609 m
- Intercept Depth
- 1404.5 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-24-342-W1:1404.5-1406.5
- Mining Method
- underground
Location
- Easting
- 652368
- Northing
- 5513881
- Elevation
- 272 m
- Azimuth
- 215 °
- Dip
- -75 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 2.5
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2024-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows no zinc mineralization over a narrow width, but contributes to confirming deep mineralization continuity.
Positive factors
- True width of 1.2 m is provided, adding confidence to the intercept geometry.
- Confirms down-dip continuity of the mineralized system at significant depth.
Negative factors
- Zinc grade of 0.0% is barren.
- Intercept length of 2.0 m is narrow.
Evidence · table
“0.0”
Context: 2.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · copperGrade: 1.3Grade Unit: %Intercept: 60.2 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 1.3
- Grade Unit
- %
- Intercept
- 60.2 m
- True Width
- 52.1 m
- From
- 548.8 m
- To
- 609 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:548.8-609
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows strong copper equivalent grade over a very wide and continuous interval, with high confidence from true width, indicating significant mineralization.
Positive factors
- Copper equivalent grade of 1.3% is strong for a VMS deposit.
- Intercept length of 60.2 m is continuous, indicating significant mineralization.
- True width of 52.1 m is provided, adding high confidence to the intercept geometry.
Evidence · table
“1.3”
Context: 60.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 52.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · goldGrade: 0.1Grade Unit: g/tIntercept: 60.2 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 60.2 m
- True Width
- 52.1 m
- From
- 548.8 m
- To
- 609 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:548.8-609
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low gold grade over a very wide and continuous interval, but contributes to overall polymetallic mineralization.
Positive factors
- Intercept length of 60.2 m is continuous, indicating significant mineralization.
- True width of 52.1 m is provided, adding high confidence to the intercept geometry.
Negative factors
- Gold grade of 0.1 g/t is below the weak threshold for gold.
Evidence · table
“0.1”
Context: 60.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 52.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · silverGrade: 5Grade Unit: g/tIntercept: 60.2 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 5
- Grade Unit
- g/t
- Intercept
- 60.2 m
- True Width
- 52.1 m
- From
- 548.8 m
- To
- 609 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:548.8-609
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade over a very wide and continuous interval, but contributes to overall polymetallic mineralization.
Positive factors
- Intercept length of 60.2 m is continuous, indicating significant mineralization.
- True width of 52.1 m is provided, adding high confidence to the intercept geometry.
Negative factors
- Silver grade of 5.0 g/t is very low.
Evidence · table
“5.0”
Context: 60.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 52.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 60.2 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 60.2 m
- True Width
- 52.1 m
- From
- 548.8 m
- To
- 609 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:548.8-609
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows no zinc mineralization over a very wide and continuous interval, but contributes to overall polymetallic mineralization.
Positive factors
- Intercept length of 60.2 m is continuous, indicating significant mineralization.
- True width of 52.1 m is provided, adding high confidence to the intercept geometry.
Negative factors
- Zinc grade of 0.0% is barren.
Evidence · table
“0.0”
Context: 60.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 52.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · copperGrade: 1Grade Unit: %Intercept: 25.2 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 1
- Grade Unit
- %
- Intercept
- 25.2 m
- True Width
- 21.8 m
- From
- 548.8 m
- To
- 574 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:548.8-574
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows strong copper equivalent grade over a strong width, contributing to the overall significant mineralization.
Positive factors
- Copper equivalent grade of 1.0% is strong for a VMS deposit.
- Intercept length of 25.2 m is strong, indicating good continuity.
- True width of 21.8 m is provided, adding confidence to the intercept geometry.
Evidence · table
“1.0”
Context: 25.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · goldGrade: 0.2Grade Unit: g/tIntercept: 25.2 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 25.2 m
- True Width
- 21.8 m
- From
- 548.8 m
- To
- 574 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:548.8-574
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low gold grade over a strong width, contributing to overall polymetallic mineralization.
Positive factors
- Intercept length of 25.2 m is strong, indicating good continuity.
- True width of 21.8 m is provided, adding confidence to the intercept geometry.
Negative factors
- Gold grade of 0.2 g/t is below the weak threshold for gold.
Evidence · table
“0.2”
Context: 25.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · silverGrade: 5.8Grade Unit: g/tIntercept: 25.2 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 5.8
- Grade Unit
- g/t
- Intercept
- 25.2 m
- True Width
- 21.8 m
- From
- 548.8 m
- To
- 574 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:548.8-574
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade over a strong width, contributing to overall polymetallic mineralization.
Positive factors
- Intercept length of 25.2 m is strong, indicating good continuity.
- True width of 21.8 m is provided, adding confidence to the intercept geometry.
Negative factors
- Silver grade of 5.8 g/t is very low.
Evidence · table
“5.8”
Context: 25.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · zincGrade: 0.1Grade Unit: %Intercept: 25.2 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 25.2 m
- True Width
- 21.8 m
- From
- 548.8 m
- To
- 574 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:548.8-574
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low zinc grade over a strong width, contributing to overall polymetallic mineralization.
Positive factors
- Intercept length of 25.2 m is strong, indicating good continuity.
- True width of 21.8 m is provided, adding confidence to the intercept geometry.
Negative factors
- Zinc grade of 0.1% is very low.
Evidence · table
“0.1”
Context: 25.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 21.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · copperGrade: 2Grade Unit: %Intercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 2
- Grade Unit
- %
- Intercept
- 4.4 m
- True Width
- 3.8 m
- From
- 562 m
- To
- 566.4 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:562-566.4
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows strong copper equivalent grade over a narrow width, contributing to the overall high-grade mineralization.
Positive factors
- Copper equivalent grade of 2.0% is strong for a VMS deposit.
- True width of 3.8 m is provided, adding confidence to the intercept geometry.
Negative factors
- Intercept length of 4.4 m is narrow.
Evidence · table
“2.0”
Context: 4.4
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · goldGrade: 0.3Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 4.4 m
- True Width
- 3.8 m
- From
- 562 m
- To
- 566.4 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:562-566.4
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade over a narrow width, contributing to the overall polymetallic mineralization.
Positive factors
- Gold grade of 0.3 g/t meets the weak threshold for gold.
- True width of 3.8 m is provided, adding confidence to the intercept geometry.
Negative factors
- Intercept length of 4.4 m is narrow.
Evidence · table
“0.3”
Context: 4.4
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · silverGrade: 9Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 9
- Grade Unit
- g/t
- Intercept
- 4.4 m
- True Width
- 3.8 m
- From
- 562 m
- To
- 566.4 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:562-566.4
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade over a narrow width, contributing to the overall polymetallic mineralization.
Positive factors
- True width of 3.8 m is provided, adding confidence to the intercept geometry.
Negative factors
- Silver grade of 9.0 g/t is very low.
- Intercept length of 4.4 m is narrow.
Evidence · table
“9.0”
Context: 4.4
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · zincGrade: 0.1Grade Unit: %Intercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 4.4 m
- True Width
- 3.8 m
- From
- 562 m
- To
- 566.4 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:562-566.4
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low zinc grade over a narrow width, contributing to the overall polymetallic mineralization.
Positive factors
- True width of 3.8 m is provided, adding confidence to the intercept geometry.
Negative factors
- Zinc grade of 0.1% is very low.
- Intercept length of 4.4 m is narrow.
Evidence · table
“0.1”
Context: 4.4
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · copperGrade: 2.5Grade Unit: %Intercept: 18.8 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 2.5
- Grade Unit
- %
- Intercept
- 18.8 m
- True Width
- 16.3 m
- From
- 580.4 m
- To
- 599.2 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:580.4-599.2
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 2.5
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows exceptional copper equivalent grade over a strong width, contributing significantly to the overall high-grade mineralization.
Positive factors
- Copper equivalent grade of 2.5% is exceptional for a VMS deposit.
- Intercept length of 18.8 m is strong, indicating good continuity.
- True width of 16.3 m is provided, adding confidence to the intercept geometry.
Evidence · table
“2.5”
Context: 18.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 16.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · goldGrade: 0.2Grade Unit: g/tIntercept: 18.8 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 18.8 m
- True Width
- 16.3 m
- From
- 580.4 m
- To
- 599.2 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:580.4-599.2
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 2.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low gold grade over a strong width, contributing to overall polymetallic mineralization.
Positive factors
- Intercept length of 18.8 m is strong, indicating good continuity.
- True width of 16.3 m is provided, adding confidence to the intercept geometry.
Negative factors
- Gold grade of 0.2 g/t is below the weak threshold for gold.
Evidence · table
“0.2”
Context: 18.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 16.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · silverGrade: 6.9Grade Unit: g/tIntercept: 18.8 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 6.9
- Grade Unit
- g/t
- Intercept
- 18.8 m
- True Width
- 16.3 m
- From
- 580.4 m
- To
- 599.2 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:580.4-599.2
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 2.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade over a strong width, contributing to overall polymetallic mineralization.
Positive factors
- Intercept length of 18.8 m is strong, indicating good continuity.
- True width of 16.3 m is provided, adding confidence to the intercept geometry.
Negative factors
- Silver grade of 6.9 g/t is very low.
Evidence · table
“6.9”
Context: 18.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 16.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 18.8 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 18.8 m
- True Width
- 16.3 m
- From
- 580.4 m
- To
- 599.2 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:580.4-599.2
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 2.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows no zinc mineralization over a strong width, but contributes to overall polymetallic mineralization.
Positive factors
- Intercept length of 18.8 m is strong, indicating good continuity.
- True width of 16.3 m is provided, adding confidence to the intercept geometry.
Negative factors
- Zinc grade of 0.0% is barren.
Evidence · table
“0.0”
Context: 18.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 16.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · copperGrade: 3.9Grade Unit: %Intercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 3.9
- Grade Unit
- %
- Intercept
- 9.2 m
- True Width
- 8 m
- From
- 590 m
- To
- 599.2 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:590-599.2
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 3.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows exceptional copper equivalent grade over a moderate width, representing a very high-grade zone within the broader intercept.
Positive factors
- Copper equivalent grade of 3.9% is exceptional for a VMS deposit.
- Intercept length of 9.2 m is moderate, indicating good continuity.
- True width of 8.0 m is provided, adding confidence to the intercept geometry.
Evidence · table
“3.9”
Context: 9.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · goldGrade: 0.3Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 9.2 m
- True Width
- 8 m
- From
- 590 m
- To
- 599.2 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:590-599.2
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 3.7
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade over a moderate width, contributing to the overall polymetallic mineralization.
Positive factors
- Gold grade of 0.3 g/t meets the weak threshold for gold.
- Intercept length of 9.2 m is moderate, indicating good continuity.
- True width of 8.0 m is provided, adding confidence to the intercept geometry.
Evidence · table
“0.3”
Context: 9.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · silverGrade: 9.9Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 9.9
- Grade Unit
- g/t
- Intercept
- 9.2 m
- True Width
- 8 m
- From
- 590 m
- To
- 599.2 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:590-599.2
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 3.7
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade over a moderate width, contributing to the overall polymetallic mineralization.
Positive factors
- Intercept length of 9.2 m is moderate, indicating good continuity.
- True width of 8.0 m is provided, adding confidence to the intercept geometry.
Negative factors
- Silver grade of 9.9 g/t is very low.
Evidence · table
“9.9”
Context: 9.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-366-W1B26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- 1274-25-366-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 9.2 m
- True Width
- 8 m
- From
- 590 m
- To
- 599.2 m
- Hole Depth
- 721 m
- Intercept Depth
- 548.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-366-W1:590-599.2
- Mining Method
- underground
Location
- Easting
- 653200
- Northing
- 5513081
- Elevation
- 269 m
- Azimuth
- 347 °
- Dip
- -72 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 3.7
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows no zinc mineralization over a moderate width, but contributes to the overall polymetallic mineralization.
Positive factors
- Intercept length of 9.2 m is moderate, indicating good continuity.
- True width of 8.0 m is provided, adding confidence to the intercept geometry.
Negative factors
- Zinc grade of 0.0% is barren.
Evidence · table
“0.0”
Context: 9.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-368-W1B26 Polymetallic Deposit · copperGrade: 1.2Grade Unit: %Intercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- 1274-25-368-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 1.2
- Grade Unit
- %
- Intercept
- 3.5 m
- True Width
- 2.7 m
- From
- 549 m
- To
- 552.5 m
- Hole Depth
- 750 m
- Intercept Depth
- 549 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-368-W1:549-552.5
- Mining Method
- underground
Location
- Easting
- 653348
- Northing
- 5513092
- Elevation
- 268 m
- Azimuth
- 7 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows strong copper equivalent grade over a narrow width, extending the mineralization eastward with true width provided.
Positive factors
- Copper equivalent grade of 1.2% is strong for a VMS deposit.
- True width of 2.7 m is provided, adding confidence to the intercept geometry.
- Extends the known system eastward.
Negative factors
- Intercept length of 3.5 m is narrow.
Evidence · table
“1.2”
Context: 3.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-368-W1B26 Polymetallic Deposit · goldGrade: 0.5Grade Unit: g/tIntercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- 1274-25-368-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 3.5 m
- True Width
- 2.7 m
- From
- 549 m
- To
- 552.5 m
- Hole Depth
- 750 m
- Intercept Depth
- 549 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-368-W1:549-552.5
- Mining Method
- underground
Location
- Easting
- 653348
- Northing
- 5513092
- Elevation
- 268 m
- Azimuth
- 7 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a narrow width, extending the mineralization eastward with true width provided.
Positive factors
- Gold grade of 0.5 g/t is moderate for gold.
- True width of 2.7 m is provided, adding confidence to the intercept geometry.
- Extends the known system eastward.
Negative factors
- Intercept length of 3.5 m is narrow.
Evidence · table
“0.5”
Context: 3.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-368-W1B26 Polymetallic Deposit · silverGrade: 5.5Grade Unit: g/tIntercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- 1274-25-368-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 5.5
- Grade Unit
- g/t
- Intercept
- 3.5 m
- True Width
- 2.7 m
- From
- 549 m
- To
- 552.5 m
- Hole Depth
- 750 m
- Intercept Depth
- 549 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-368-W1:549-552.5
- Mining Method
- underground
Location
- Easting
- 653348
- Northing
- 5513092
- Elevation
- 268 m
- Azimuth
- 7 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade over a narrow width, extending the mineralization eastward with true width provided.
Positive factors
- True width of 2.7 m is provided, adding confidence to the intercept geometry.
- Extends the known system eastward.
Negative factors
- Silver grade of 5.5 g/t is very low.
- Intercept length of 3.5 m is narrow.
Evidence · table
“5.5”
Context: 3.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-25-368-W1B26 Polymetallic Deposit · zincGrade: 0.1Grade Unit: %Intercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- 1274-25-368-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 3.5 m
- True Width
- 2.7 m
- From
- 549 m
- To
- 552.5 m
- Hole Depth
- 750 m
- Intercept Depth
- 549 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-25-368-W1:549-552.5
- Mining Method
- underground
Location
- Easting
- 653348
- Northing
- 5513092
- Elevation
- 268 m
- Azimuth
- 7 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low zinc grade over a narrow width, extending the mineralization eastward with true width provided.
Positive factors
- True width of 2.7 m is provided, adding confidence to the intercept geometry.
- Extends the known system eastward.
Negative factors
- Zinc grade of 0.1% is very low.
- Intercept length of 3.5 m is narrow.
Evidence · table
“0.1”
Context: 3.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · copperGrade: 0.7Grade Unit: %Intercept: 40 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.7
- Grade Unit
- %
- Intercept
- 40 m
- True Width
- 30.6 m
- From
- 966 m
- To
- 1006 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:966-1006
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.7
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows moderate copper equivalent grade over a strong width, successfully extending the mineralized footprint of the WDP with true width provided.
Positive factors
- Copper equivalent grade of 0.7% is moderate for a VMS deposit.
- Intercept length of 40.0 m is strong, indicating good continuity.
- True width of 30.6 m is provided, adding confidence to the intercept geometry.
- Successfully extended the mineralized footprint of the WDP.
Evidence · table
“0.7”
Context: 40.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · goldGrade: 0.1Grade Unit: g/tIntercept: 40 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 40 m
- True Width
- 30.6 m
- From
- 966 m
- To
- 1006 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:966-1006
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.7
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low gold grade over a strong width, contributing to overall polymetallic mineralization and extending the WDP.
Positive factors
- Intercept length of 40.0 m is strong, indicating good continuity.
- True width of 30.6 m is provided, adding confidence to the intercept geometry.
- Successfully extended the mineralized footprint of the WDP.
Negative factors
- Gold grade of 0.1 g/t is below the weak threshold for gold.
Evidence · table
“0.1”
Context: 40.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · silverGrade: 1.9Grade Unit: g/tIntercept: 40 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 40 m
- True Width
- 30.6 m
- From
- 966 m
- To
- 1006 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:966-1006
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.7
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade over a strong width, contributing to overall polymetallic mineralization and extending the WDP.
Positive factors
- Intercept length of 40.0 m is strong, indicating good continuity.
- True width of 30.6 m is provided, adding confidence to the intercept geometry.
- Successfully extended the mineralized footprint of the WDP.
Negative factors
- Silver grade of 1.9 g/t is very low.
Evidence · table
“1.9”
Context: 40.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 40 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 40 m
- True Width
- 30.6 m
- From
- 966 m
- To
- 1006 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:966-1006
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.7
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows no zinc mineralization over a strong width, but contributes to overall polymetallic mineralization and extending the WDP.
Positive factors
- Intercept length of 40.0 m is strong, indicating good continuity.
- True width of 30.6 m is provided, adding confidence to the intercept geometry.
- Successfully extended the mineralized footprint of the WDP.
Negative factors
- Zinc grade of 0.0% is barren.
Evidence · table
“0.0”
Context: 40.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 30.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · copperGrade: 1.7Grade Unit: %Intercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 1.7
- Grade Unit
- %
- Intercept
- 7.6 m
- True Width
- 5.8 m
- From
- 970.2 m
- To
- 977.8 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:970.2-977.8
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.7
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows strong copper equivalent grade over a moderate width, contributing to the overall mineralization.
Positive factors
- Copper equivalent grade of 1.7% is strong for a VMS deposit.
- Intercept length of 7.6 m is moderate, indicating good continuity.
- True width of 5.8 m is provided, adding confidence to the intercept geometry.
Evidence · table
“1.7”
Context: 7.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · goldGrade: 0.3Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 7.6 m
- True Width
- 5.8 m
- From
- 970.2 m
- To
- 977.8 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:970.2-977.8
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.6
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade over a moderate width, contributing to the overall polymetallic mineralization.
Positive factors
- Gold grade of 0.3 g/t meets the weak threshold for gold.
- Intercept length of 7.6 m is moderate, indicating good continuity.
- True width of 5.8 m is provided, adding confidence to the intercept geometry.
Evidence · table
“0.3”
Context: 7.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · silverGrade: 2.7Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 2.7
- Grade Unit
- g/t
- Intercept
- 7.6 m
- True Width
- 5.8 m
- From
- 970.2 m
- To
- 977.8 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:970.2-977.8
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.6
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade over a moderate width, contributing to the overall polymetallic mineralization.
Positive factors
- Intercept length of 7.6 m is moderate, indicating good continuity.
- True width of 5.8 m is provided, adding confidence to the intercept geometry.
Negative factors
- Silver grade of 2.7 g/t is very low.
Evidence · table
“2.7”
Context: 7.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 7.6 m
- True Width
- 5.8 m
- From
- 970.2 m
- To
- 977.8 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:970.2-977.8
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.6
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows no zinc mineralization over a moderate width, but contributes to overall polymetallic mineralization.
Positive factors
- Intercept length of 7.6 m is moderate, indicating good continuity.
- True width of 5.8 m is provided, adding confidence to the intercept geometry.
Negative factors
- Zinc grade of 0.0% is barren.
Evidence · table
“0.0”
Context: 7.6
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · copperGrade: 1.8Grade Unit: %Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 1.8
- Grade Unit
- %
- Intercept
- 2.8 m
- True Width
- 2.1 m
- From
- 975 m
- To
- 977.8 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:975-977.8
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.8
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows strong copper equivalent grade over a narrow width, contributing to the overall mineralization.
Positive factors
- Copper equivalent grade of 1.8% is strong for a VMS deposit.
- True width of 2.1 m is provided, adding confidence to the intercept geometry.
Negative factors
- Intercept length of 2.8 m is narrow.
Evidence · table
“1.8”
Context: 2.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · goldGrade: 0.5Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 2.8 m
- True Width
- 2.1 m
- From
- 975 m
- To
- 977.8 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:975-977.8
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.7
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold grade over a narrow width, contributing to the overall polymetallic mineralization.
Positive factors
- Gold grade of 0.5 g/t is moderate for gold.
- True width of 2.1 m is provided, adding confidence to the intercept geometry.
Negative factors
- Intercept length of 2.8 m is narrow.
Evidence · table
“0.5”
Context: 2.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · silverGrade: 3Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 2.8 m
- True Width
- 2.1 m
- From
- 975 m
- To
- 977.8 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:975-977.8
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.7
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade over a narrow width, contributing to the overall polymetallic mineralization.
Positive factors
- True width of 2.1 m is provided, adding confidence to the intercept geometry.
Negative factors
- Silver grade of 3.0 g/t is very low.
- Intercept length of 2.8 m is narrow.
Evidence · table
“3.0”
Context: 2.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.8 m
- True Width
- 2.1 m
- From
- 975 m
- To
- 977.8 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:975-977.8
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.7
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows no zinc mineralization over a narrow width, contributing to the overall polymetallic mineralization.
Positive factors
- True width of 2.1 m is provided, adding confidence to the intercept geometry.
Negative factors
- Zinc grade of 0.0% is barren.
- Intercept length of 2.8 m is narrow.
Evidence · table
“0.0”
Context: 2.8
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · copperGrade: 1Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 1
- Grade Unit
- %
- Intercept
- 7 m
- True Width
- 5.4 m
- From
- 982 m
- To
- 989 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:982-989
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows strong copper equivalent grade over a moderate width, contributing to the overall mineralization.
Positive factors
- Copper equivalent grade of 1.0% is strong for a VMS deposit.
- Intercept length of 7.0 m is moderate, indicating good continuity.
- True width of 5.4 m is provided, adding confidence to the intercept geometry.
Evidence · table
“1.0”
Context: 7.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · goldGrade: 0.1Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 7 m
- True Width
- 5.4 m
- From
- 982 m
- To
- 989 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:982-989
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low gold grade over a moderate width, contributing to the overall polymetallic mineralization.
Positive factors
- Intercept length of 7.0 m is moderate, indicating good continuity.
- True width of 5.4 m is provided, adding confidence to the intercept geometry.
Negative factors
- Gold grade of 0.1 g/t is below the weak threshold for gold.
Evidence · table
“0.1”
Context: 7.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · silverGrade: 2.5Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 2.5
- Grade Unit
- g/t
- Intercept
- 7 m
- True Width
- 5.4 m
- From
- 982 m
- To
- 989 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:982-989
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade over a moderate width, contributing to the overall polymetallic mineralization.
Positive factors
- Intercept length of 7.0 m is moderate, indicating good continuity.
- True width of 5.4 m is provided, adding confidence to the intercept geometry.
Negative factors
- Silver grade of 2.5 g/t is very low.
Evidence · table
“2.5”
Context: 7.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W1AB26 Polymetallic Deposit · zincGrade: 0.2Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W1A
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 7 m
- True Width
- 5.4 m
- From
- 982 m
- To
- 989 m
- Hole Depth
- 1153 m
- Intercept Depth
- 966 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W1A:982-989
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low zinc grade over a moderate width, contributing to the overall polymetallic mineralization.
Positive factors
- Intercept length of 7.0 m is moderate, indicating good continuity.
- True width of 5.4 m is provided, adding confidence to the intercept geometry.
Negative factors
- Zinc grade of 0.2% is very low.
Evidence · table
“0.2”
Context: 7.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W2B26 Polymetallic Deposit · copperGrade: 1.5Grade Unit: %Intercept: 14.1 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W2
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 1.5
- Grade Unit
- %
- Intercept
- 14.1 m
- True Width
- 10 m
- From
- 985.3 m
- To
- 999.4 m
- Hole Depth
- 1183 m
- Intercept Depth
- 985.3 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W2:985.3-999.4
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.5
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows strong copper equivalent grade over a moderate width, adding continuity to the mineralized footprint with true width provided.
Positive factors
- Copper equivalent grade of 1.5% is strong for a VMS deposit.
- Intercept length of 14.1 m is moderate, indicating good continuity.
- True width of 10.0 m is provided, adding confidence to the intercept geometry.
- Intersected high-grade narrow mineralization in targeted areas, adding continuity to the mineralized footprint.
Evidence · table
“1.5”
Context: 14.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W2B26 Polymetallic Deposit · goldGrade: 0.1Grade Unit: g/tIntercept: 14.1 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W2
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 14.1 m
- True Width
- 10 m
- From
- 985.3 m
- To
- 999.4 m
- Hole Depth
- 1183 m
- Intercept Depth
- 985.3 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W2:985.3-999.4
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low gold grade over a moderate width, contributing to overall polymetallic mineralization and adding continuity to the WDP.
Positive factors
- Intercept length of 14.1 m is moderate, indicating good continuity.
- True width of 10.0 m is provided, adding confidence to the intercept geometry.
- Intersected high-grade narrow mineralization in targeted areas, adding continuity to the mineralized footprint.
Negative factors
- Gold grade of 0.1 g/t is below the weak threshold for gold.
Evidence · table
“0.1”
Context: 14.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W2B26 Polymetallic Deposit · silverGrade: 2.6Grade Unit: g/tIntercept: 14.1 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W2
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 2.6
- Grade Unit
- g/t
- Intercept
- 14.1 m
- True Width
- 10 m
- From
- 985.3 m
- To
- 999.4 m
- Hole Depth
- 1183 m
- Intercept Depth
- 985.3 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W2:985.3-999.4
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade over a moderate width, contributing to overall polymetallic mineralization and adding continuity to the WDP.
Positive factors
- Intercept length of 14.1 m is moderate, indicating good continuity.
- True width of 10.0 m is provided, adding confidence to the intercept geometry.
- Intersected high-grade narrow mineralization in targeted areas, adding continuity to the mineralized footprint.
Negative factors
- Silver grade of 2.6 g/t is very low.
Evidence · table
“2.6”
Context: 14.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W2B26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 14.1 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W2
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 14.1 m
- True Width
- 10 m
- From
- 985.3 m
- To
- 999.4 m
- Hole Depth
- 1183 m
- Intercept Depth
- 985.3 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W2:985.3-999.4
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows no zinc mineralization over a moderate width, but contributes to overall polymetallic mineralization and adding continuity to the WDP.
Positive factors
- Intercept length of 14.1 m is moderate, indicating good continuity.
- True width of 10.0 m is provided, adding confidence to the intercept geometry.
- Intersected high-grade narrow mineralization in targeted areas, adding continuity to the mineralized footprint.
Negative factors
- Zinc grade of 0.0% is barren.
Evidence · table
“0.0”
Context: 14.1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 10
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W2B26 Polymetallic Deposit · copperGrade: 2.3Grade Unit: %Intercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W2
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 2.3
- Grade Unit
- %
- Intercept
- 5.9 m
- True Width
- 4.2 m
- From
- 989.4 m
- To
- 995.3 m
- Hole Depth
- 1183 m
- Intercept Depth
- 985.3 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W2:989.4-995.3
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 2.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows strong copper equivalent grade over a moderate width, contributing to the overall high-grade mineralization.
Positive factors
- Copper equivalent grade of 2.3% is strong for a VMS deposit.
- Intercept length of 5.9 m is moderate, indicating good continuity.
- True width of 4.2 m is provided, adding confidence to the intercept geometry.
Evidence · table
“2.3”
Context: 5.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W2B26 Polymetallic Deposit · goldGrade: 0.1Grade Unit: g/tIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W2
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 5.9 m
- True Width
- 4.2 m
- From
- 989.4 m
- To
- 995.3 m
- Hole Depth
- 1183 m
- Intercept Depth
- 985.3 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W2:989.4-995.3
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 2.2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low gold grade over a moderate width, contributing to the overall polymetallic mineralization.
Positive factors
- Intercept length of 5.9 m is moderate, indicating good continuity.
- True width of 4.2 m is provided, adding confidence to the intercept geometry.
Negative factors
- Gold grade of 0.1 g/t is below the weak threshold for gold.
Evidence · table
“0.1”
Context: 5.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W2B26 Polymetallic Deposit · silverGrade: 3.6Grade Unit: g/tIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W2
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 3.6
- Grade Unit
- g/t
- Intercept
- 5.9 m
- True Width
- 4.2 m
- From
- 989.4 m
- To
- 995.3 m
- Hole Depth
- 1183 m
- Intercept Depth
- 985.3 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W2:989.4-995.3
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 2.2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade over a moderate width, contributing to the overall polymetallic mineralization.
Positive factors
- Intercept length of 5.9 m is moderate, indicating good continuity.
- True width of 4.2 m is provided, adding confidence to the intercept geometry.
Negative factors
- Silver grade of 3.6 g/t is very low.
Evidence · table
“3.6”
Context: 5.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-378-W2B26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- 1274-26-378-W2
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 5.9 m
- True Width
- 4.2 m
- From
- 989.4 m
- To
- 995.3 m
- Hole Depth
- 1183 m
- Intercept Depth
- 985.3 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-378-W2:989.4-995.3
- Mining Method
- underground
Location
- Easting
- 652486
- Northing
- 5512919
- Elevation
- 272 m
- Azimuth
- 2 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 2.2
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.6
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This sub-interval shows no zinc mineralization over a moderate width, but contributes to the overall polymetallic mineralization.
Positive factors
- Intercept length of 5.9 m is moderate, indicating good continuity.
- True width of 4.2 m is provided, adding confidence to the intercept geometry.
Negative factors
- Zinc grade of 0.0% is barren.
Evidence · table
“0.0”
Context: 5.9
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-379AB26 Polymetallic Deposit · copperGrade: 0.6Grade Unit: %Intercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- 1274-26-379A
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.6
- Grade Unit
- %
- Intercept
- 3.3 m
- True Width
- 3 m
- From
- 641.7 m
- To
- 645 m
- Hole Depth
- 735 m
- Intercept Depth
- 641.7 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-379A:641.7-645
- Mining Method
- underground
Location
- Easting
- 652071
- Northing
- 5513116
- Elevation
- 273 m
- Azimuth
- 355 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.6
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a moderate copper equivalent grade over a narrow width, targeting a lower-grade expansional target.
Positive factors
- Copper equivalent grade of 0.6% is moderate for a VMS deposit.
- True width of 3.0 m is provided, adding confidence to the intercept geometry.
Negative factors
- Intercept length of 3.3 m is narrow.
Evidence · table
“0.6”
Context: 3.3
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-379AB26 Polymetallic Deposit · goldGrade: 0.3Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- 1274-26-379A
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 3.3 m
- True Width
- 3 m
- From
- 641.7 m
- To
- 645 m
- Hole Depth
- 735 m
- Intercept Depth
- 641.7 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-379A:641.7-645
- Mining Method
- underground
Location
- Easting
- 652071
- Northing
- 5513116
- Elevation
- 273 m
- Azimuth
- 355 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.5
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, targeting a lower-grade expansional target.
Positive factors
- Gold grade of 0.3 g/t meets the weak threshold for gold.
- True width of 3.0 m is provided, adding confidence to the intercept geometry.
Negative factors
- Intercept length of 3.3 m is narrow.
Evidence · table
“0.3”
Context: 3.3
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-379AB26 Polymetallic Deposit · silverGrade: 0.7Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- 1274-26-379A
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 3.3 m
- True Width
- 3 m
- From
- 641.7 m
- To
- 645 m
- Hole Depth
- 735 m
- Intercept Depth
- 641.7 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-379A:641.7-645
- Mining Method
- underground
Location
- Easting
- 652071
- Northing
- 5513116
- Elevation
- 273 m
- Azimuth
- 355 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.5
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade over a narrow width, targeting a lower-grade expansional target.
Positive factors
- True width of 3.0 m is provided, adding confidence to the intercept geometry.
Negative factors
- Silver grade of 0.7 g/t is very low.
- Intercept length of 3.3 m is narrow.
Evidence · table
“0.7”
Context: 3.3
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-379AB26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- 1274-26-379A
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 3.3 m
- True Width
- 3 m
- From
- 641.7 m
- To
- 645 m
- Hole Depth
- 735 m
- Intercept Depth
- 641.7 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-379A:641.7-645
- Mining Method
- underground
Location
- Easting
- 652071
- Northing
- 5513116
- Elevation
- 273 m
- Azimuth
- 355 °
- Dip
- -59 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.5
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows no zinc mineralization over a narrow width, targeting a lower-grade expansional target.
Positive factors
- True width of 3.0 m is provided, adding confidence to the intercept geometry.
Negative factors
- Zinc grade of 0.0% is barren.
- Intercept length of 3.3 m is narrow.
Evidence · table
“0.0”
Context: 3.3
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-381B26 Polymetallic Deposit · copperGrade: 0.9Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- 1274-26-381
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.9
- Grade Unit
- %
- Intercept
- 2 m
- True Width
- 1.5 m
- From
- 633.5 m
- To
- 635.5 m
- Hole Depth
- 786 m
- Intercept Depth
- 633.5 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-381:633.5-635.5
- Mining Method
- underground
Location
- Easting
- 651989
- Northing
- 5513116
- Elevation
- 273 m
- Azimuth
- 330 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows moderate copper equivalent grade over a narrow width, targeting a lower-grade expansional target.
Positive factors
- Copper equivalent grade of 0.9% is moderate for a VMS deposit.
- True width of 1.5 m is provided, adding confidence to the intercept geometry.
Negative factors
- Intercept length of 2.0 m is narrow.
Evidence · table
“0.9”
Context: 2.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-381B26 Polymetallic Deposit · goldGrade: 0Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 1274-26-381
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 1.5 m
- From
- 633.5 m
- To
- 635.5 m
- Hole Depth
- 786 m
- Intercept Depth
- 633.5 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-381:633.5-635.5
- Mining Method
- underground
Location
- Easting
- 651989
- Northing
- 5513116
- Elevation
- 273 m
- Azimuth
- 330 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows no gold mineralization over a narrow width, targeting a lower-grade expansional target.
Positive factors
- True width of 1.5 m is provided, adding confidence to the intercept geometry.
Negative factors
- Gold grade of 0.0 g/t is barren.
- Intercept length of 2.0 m is narrow.
Evidence · table
“0.0”
Context: 2.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-381B26 Polymetallic Deposit · silverGrade: 7.7Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 1274-26-381
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 7.7
- Grade Unit
- g/t
- Intercept
- 2 m
- True Width
- 1.5 m
- From
- 633.5 m
- To
- 635.5 m
- Hole Depth
- 786 m
- Intercept Depth
- 633.5 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-381:633.5-635.5
- Mining Method
- underground
Location
- Easting
- 651989
- Northing
- 5513116
- Elevation
- 273 m
- Azimuth
- 330 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade over a narrow width, targeting a lower-grade expansional target.
Positive factors
- True width of 1.5 m is provided, adding confidence to the intercept geometry.
Negative factors
- Silver grade of 7.7 g/t is very low.
- Intercept length of 2.0 m is narrow.
Evidence · table
“7.7”
Context: 2.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-381B26 Polymetallic Deposit · zincGrade: 3Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- 1274-26-381
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 3
- Grade Unit
- %
- Intercept
- 2 m
- True Width
- 1.5 m
- From
- 633.5 m
- To
- 635.5 m
- Hole Depth
- 786 m
- Intercept Depth
- 633.5 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-381:633.5-635.5
- Mining Method
- underground
Location
- Easting
- 651989
- Northing
- 5513116
- Elevation
- 273 m
- Azimuth
- 330 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1.1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows moderate zinc grade over a narrow width, targeting a lower-grade expansional target.
Positive factors
- Zinc grade of 3.0% is moderate for zinc.
- True width of 1.5 m is provided, adding confidence to the intercept geometry.
Negative factors
- Intercept length of 2.0 m is narrow.
Evidence · table
“3.0”
Context: 2.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-386B26 Polymetallic Deposit · copperGrade: 0.3Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- 1274-26-386
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 7 m
- True Width
- 6.1 m
- From
- 1234 m
- To
- 1241 m
- Hole Depth
- 1435 m
- Intercept Depth
- 1234 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-386:1234-1241
- Mining Method
- underground
Location
- Easting
- 651918
- Northing
- 5512813
- Elevation
- 277 m
- Azimuth
- 350 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows weak copper equivalent grade over a moderate width, confirming the presence of mineralization in the western extension but at lower grades.
Positive factors
- Copper equivalent grade of 0.3% is weak for a VMS deposit.
- True width of 6.1 m is provided, adding confidence to the intercept geometry.
- Confirms the fertile mineralizing system continues into the western part of the deposit.
Negative factors
- Mineralization is not as robust as in the core of the corridor.
Evidence · table
“0.3”
Context: 7.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-386B26 Polymetallic Deposit · goldGrade: 0Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- 1274-26-386
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 7 m
- True Width
- 6.1 m
- From
- 1234 m
- To
- 1241 m
- Hole Depth
- 1435 m
- Intercept Depth
- 1234 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-386:1234-1241
- Mining Method
- underground
Location
- Easting
- 651918
- Northing
- 5512813
- Elevation
- 277 m
- Azimuth
- 350 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows no gold mineralization over a moderate width, confirming the presence of mineralization in the western extension but at lower grades.
Positive factors
- True width of 6.1 m is provided, adding confidence to the intercept geometry.
- Confirms the fertile mineralizing system continues into the western part of the deposit.
Negative factors
- Gold grade of 0.0 g/t is barren.
- Mineralization is not as robust as in the core of the corridor.
Evidence · table
“0.0”
Context: 7.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-386B26 Polymetallic Deposit · silverGrade: 2.7Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- 1274-26-386
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 2.7
- Grade Unit
- g/t
- Intercept
- 7 m
- True Width
- 6.1 m
- From
- 1234 m
- To
- 1241 m
- Hole Depth
- 1435 m
- Intercept Depth
- 1234 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-386:1234-1241
- Mining Method
- underground
Location
- Easting
- 651918
- Northing
- 5512813
- Elevation
- 277 m
- Azimuth
- 350 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade over a moderate width, confirming the presence of mineralization in the western extension but at lower grades.
Positive factors
- True width of 6.1 m is provided, adding confidence to the intercept geometry.
- Confirms the fertile mineralizing system continues into the western part of the deposit.
Negative factors
- Silver grade of 2.7 g/t is very low.
- Mineralization is not as robust as in the core of the corridor.
Evidence · table
“2.7”
Context: 7.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-386B26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- 1274-26-386
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 7 m
- True Width
- 6.1 m
- From
- 1234 m
- To
- 1241 m
- Hole Depth
- 1435 m
- Intercept Depth
- 1234 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-386:1234-1241
- Mining Method
- underground
Location
- Easting
- 651918
- Northing
- 5512813
- Elevation
- 277 m
- Azimuth
- 350 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows no zinc mineralization over a moderate width, confirming the presence of mineralization in the western extension but at lower grades.
Positive factors
- True width of 6.1 m is provided, adding confidence to the intercept geometry.
- Confirms the fertile mineralizing system continues into the western part of the deposit.
Negative factors
- Zinc grade of 0.0% is barren.
- Mineralization is not as robust as in the core of the corridor.
Evidence · table
“0.0”
Context: 7.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387B26 Polymetallic Deposit · copperGrade: 1Grade Unit: %Intercept: 7.2 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 1
- Grade Unit
- %
- Intercept
- 7.2 m
- True Width
- 6.7 m
- From
- 921.2 m
- To
- 928.3 m
- Hole Depth
- 1084 m
- Intercept Depth
- 921.2 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-387:921.2-928.3
- Mining Method
- underground
Location
- Easting
- 652339
- Northing
- 5512915
- Elevation
- 276 m
- Azimuth
- 354 °
- Dip
- -69 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 1
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Positive factors
- Copper equivalent grade of 1.0% is strong for a VMS deposit.
- True width of 6.7 m is provided, adding confidence to the intercept geometry.
Evidence · table
“1.0”
Context: 7.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387B26 Polymetallic Deposit · goldGrade: 0.7Grade Unit: g/tIntercept: 7.2 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 7.2 m
- True Width
- 6.7 m
- From
- 921.2 m
- To
- 928.3 m
- Hole Depth
- 1084 m
- Intercept Depth
- 921.2 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-387:921.2-928.3
- Mining Method
- underground
Location
- Easting
- 652339
- Northing
- 5512915
- Elevation
- 276 m
- Azimuth
- 354 °
- Dip
- -69 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows moderate gold grade over a moderate width, helping to link higher-grade areas in the resource with true width provided.
Positive factors
- Gold grade of 0.7 g/t is moderate for gold.
- True width of 6.7 m is provided, adding confidence to the intercept geometry.
- Intersected economically significant mineralization that helps link higher-grade areas in the resource.
Evidence · table
“0.7”
Context: 7.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387B26 Polymetallic Deposit · silverGrade: 0.6Grade Unit: g/tIntercept: 7.2 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 7.2 m
- True Width
- 6.7 m
- From
- 921.2 m
- To
- 928.3 m
- Hole Depth
- 1084 m
- Intercept Depth
- 921.2 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-387:921.2-928.3
- Mining Method
- underground
Location
- Easting
- 652339
- Northing
- 5512915
- Elevation
- 276 m
- Azimuth
- 354 °
- Dip
- -69 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade over a moderate width, but helps link higher-grade areas in the resource with true width provided.
Positive factors
- True width of 6.7 m is provided, adding confidence to the intercept geometry.
- Intersected economically significant mineralization that helps link higher-grade areas in the resource.
Negative factors
- Silver grade of 0.6 g/t is very low.
Evidence · table
“0.6”
Context: 7.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387B26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 7.2 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 7.2 m
- True Width
- 6.7 m
- From
- 921.2 m
- To
- 928.3 m
- Hole Depth
- 1084 m
- Intercept Depth
- 921.2 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- 1274-26-387:921.2-928.3
- Mining Method
- underground
Location
- Easting
- 652339
- Northing
- 5512915
- Elevation
- 276 m
- Azimuth
- 354 °
- Dip
- -69 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- boron, arsenic, mercury
Metal Equivalent
- Metal Eq. Grade
- 0.9
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % CuEq
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows no zinc mineralization over a moderate width, but helps link higher-grade areas in the resource with true width provided.
Positive factors
- True width of 6.7 m is provided, adding confidence to the intercept geometry.
- Intersected economically significant mineralization that helps link higher-grade areas in the resource.
Negative factors
- Zinc grade of 0.0% is barren.
Evidence · table
“0.0”
Context: 7.2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 6.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Deleterious Elements Presentnegative
Penalty elements (arsenic, antimony, etc.) or refractory concerns noted in the release.
Why it applies: deleterious_flag is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · copperGrade: 0.9Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.9
- Grade Unit
- %
- Intercept
- 2.5 m
- True Width
- 2.3 m
- From
- 932.4 m
- To
- 934.9 m
- Intercept Depth
- 932.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:932.4-934.9
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0.9 % copper is moderate against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 2.3 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.9”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · goldGrade: 0.2Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 2.5 m
- True Width
- 2.3 m
- From
- 932.4 m
- To
- 934.9 m
- Intercept Depth
- 932.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:932.4-934.9
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0.2 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.2 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.2”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · silverGrade: 1.4Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 2.5 m
- True Width
- 2.3 m
- From
- 932.4 m
- To
- 934.9 m
- Intercept Depth
- 932.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:932.4-934.9
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 1.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 3.5 g/t·m is below.
Negative factors
- 1.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.4”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2.5 m
- True Width
- 2.3 m
- From
- 932.4 m
- To
- 934.9 m
- Intercept Depth
- 932.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:932.4-934.9
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.0”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W1B26 Polymetallic Deposit · copperGrade: 0Grade Unit: %Intercept: 20.6 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 20.6 m
- True Width
- 17.8 m
- From
- 859.9 m
- To
- 880.5 m
- Intercept Depth
- 859.9 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W1:859.9-880.5
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.0”
Context: 1274-26-387-W1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W1B26 Polymetallic Deposit · goldGrade: 0Grade Unit: g/tIntercept: 20.6 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 20.6 m
- True Width
- 17.8 m
- From
- 859.9 m
- To
- 880.5 m
- Intercept Depth
- 859.9 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W1:859.9-880.5
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.0”
Context: 1274-26-387-W1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W1B26 Polymetallic Deposit · silverGrade: 41.1Grade Unit: g/tIntercept: 20.6 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 41.1
- Grade Unit
- g/t
- Intercept
- 20.6 m
- True Width
- 17.8 m
- From
- 859.9 m
- To
- 880.5 m
- Intercept Depth
- 859.9 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W1:859.9-880.5
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 41.1 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 846.7 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“41.1”
Context: 1274-26-387-W1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W1B26 Polymetallic Deposit · zincGrade: 1Grade Unit: %Intercept: 20.6 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 1
- Grade Unit
- %
- Intercept
- 20.6 m
- True Width
- 17.8 m
- From
- 859.9 m
- To
- 880.5 m
- Intercept Depth
- 859.9 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W1:859.9-880.5
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 1 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 20.6 %·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.0”
Context: 1274-26-387-W1
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 17.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W1B26 Polymetallic Deposit · copperGrade: 0Grade Unit: %Intercept: 11.1 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 11.1 m
- True Width
- 9.6 m
- From
- 863.5 m
- To
- 874.6 m
- Intercept Depth
- 863.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W1:863.5-874.6
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.0”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W1B26 Polymetallic Deposit · goldGrade: 0Grade Unit: g/tIntercept: 11.1 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 11.1 m
- True Width
- 9.6 m
- From
- 863.5 m
- To
- 874.6 m
- Intercept Depth
- 863.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W1:863.5-874.6
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.0”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W1B26 Polymetallic Deposit · silverGrade: 69.9Grade Unit: g/tIntercept: 11.1 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 69.9
- Grade Unit
- g/t
- Intercept
- 11.1 m
- True Width
- 9.6 m
- From
- 863.5 m
- To
- 874.6 m
- Intercept Depth
- 863.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W1:863.5-874.6
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 69.9 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 775.9 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“69.9”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W1B26 Polymetallic Deposit · zincGrade: 1.7Grade Unit: %Intercept: 11.1 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 1.7
- Grade Unit
- %
- Intercept
- 11.1 m
- True Width
- 9.6 m
- From
- 863.5 m
- To
- 874.6 m
- Intercept Depth
- 863.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W1:863.5-874.6
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 1.7 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 18.9 %·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.7”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 9.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W1B26 Polymetallic Deposit · copperGrade: 0Grade Unit: %Intercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 4.5 m
- True Width
- 3.9 m
- From
- 863.5 m
- To
- 868 m
- Intercept Depth
- 863.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W1:863.5-868
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.0”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W1B26 Polymetallic Deposit · goldGrade: 0Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 4.5 m
- True Width
- 3.9 m
- From
- 863.5 m
- To
- 868 m
- Intercept Depth
- 863.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W1:863.5-868
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.0”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W1B26 Polymetallic Deposit · silverGrade: 111.7Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 111.7
- Grade Unit
- g/t
- Intercept
- 4.5 m
- True Width
- 3.9 m
- From
- 863.5 m
- To
- 868 m
- Intercept Depth
- 863.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W1:863.5-868
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 111.7 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 502.7 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“111.7”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W1B26 Polymetallic Deposit · zincGrade: 3Grade Unit: %Intercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W1
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 3
- Grade Unit
- %
- Intercept
- 4.5 m
- True Width
- 3.9 m
- From
- 863.5 m
- To
- 868 m
- Intercept Depth
- 863.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W1:863.5-868
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 3 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 13.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.0”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · copperGrade: 0.1Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 913.2 m
- To
- 913.7 m
- Intercept Depth
- 913.2 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:913.2-913.7
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.1 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.1”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · goldGrade: 0.1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 913.2 m
- To
- 913.7 m
- Intercept Depth
- 913.2 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:913.2-913.7
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.1 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.1”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · silverGrade: 19.4Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 19.4
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 913.2 m
- To
- 913.7 m
- Intercept Depth
- 913.2 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:913.2-913.7
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 19.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 9.7 g/t·m is below.
Negative factors
- 19.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“19.4”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · zincGrade: 19.2Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 19.2
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.4 m
- From
- 913.2 m
- To
- 913.7 m
- Intercept Depth
- 913.2 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:913.2-913.7
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 19.2 % zinc is exceptional against the default band [18, 10, 5, 2] %. Grade×width 9.6 %·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 19.2 % zinc is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“19.2”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · copperGrade: 0.2Grade Unit: %Intercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 5.5 m
- True Width
- 4.8 m
- From
- 962 m
- To
- 967.5 m
- Intercept Depth
- 962 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:962-967.5
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0.2 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 1.1 %·m is below.
Negative factors
- 0.2 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.2”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · goldGrade: 0.5Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 5.5 m
- True Width
- 4.8 m
- From
- 962 m
- To
- 967.5 m
- Intercept Depth
- 962 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:962-967.5
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0.5 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 2.8 g/t·m is below.
Negative factors
- 0.5 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.5”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · silverGrade: 0.6Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 5.5 m
- True Width
- 4.8 m
- From
- 962 m
- To
- 967.5 m
- Intercept Depth
- 962 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:962-967.5
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 3.3 g/t·m is below.
Negative factors
- 0.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.6”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 5.5 m
- True Width
- 4.8 m
- From
- 962 m
- To
- 967.5 m
- Intercept Depth
- 962 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:962-967.5
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.0”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W2B26 Polymetallic Deposit · copperGrade: 2.3Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W2
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 2.3
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.3 m
- From
- 990.6 m
- To
- 991.1 m
- Intercept Depth
- 990.6 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W2:990.6-991.1
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 2.3 % copper is strong against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 1.1 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.3 % copper is strong on the vms deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.3”
Context: 1274-26-387-W2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W2B26 Polymetallic Deposit · goldGrade: 8.1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W2
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 8.1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.3 m
- From
- 990.6 m
- To
- 991.1 m
- Intercept Depth
- 990.6 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W2:990.6-991.1
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 8.1 g/t gold is strong against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 4.0 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 8.1 g/t gold is strong on the underground mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.1”
Context: 1274-26-387-W2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W2B26 Polymetallic Deposit · silverGrade: 2.9Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W2
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 2.9
- Grade Unit
- g/t
- Intercept
- 0.5 m
- True Width
- 0.3 m
- From
- 990.6 m
- To
- 991.1 m
- Intercept Depth
- 990.6 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W2:990.6-991.1
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 2.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.4 g/t·m is below.
Negative factors
- 2.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.9”
Context: 1274-26-387-W2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
1274-26-387-W2B26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- 1274-26-387-W2
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 0.5 m
- True Width
- 0.3 m
- From
- 990.6 m
- To
- 991.1 m
- Intercept Depth
- 990.6 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- 1274-26-387-W2:990.6-991.1
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.0”
Context: 1274-26-387-W2
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · copperGrade: 2.8Grade Unit: %Intercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 2.8
- Grade Unit
- %
- Intercept
- 1.8 m
- True Width
- 1.2 m
- From
- 998.4 m
- To
- 1000.2 m
- Intercept Depth
- 998.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:998.4-1000.2
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 2.8 % copper is exceptional against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 5.0 %·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 2.8 % copper is exceptional on the vms deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.8”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · goldGrade: 1.6Grade Unit: g/tIntercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 1.6
- Grade Unit
- g/t
- Intercept
- 1.8 m
- True Width
- 1.2 m
- From
- 998.4 m
- To
- 1000.2 m
- Intercept Depth
- 998.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:998.4-1000.2
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 1.6 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 2.9 g/t·m is below.
Negative factors
- 1.6 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.6”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · silverGrade: 3.4Grade Unit: g/tIntercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 3.4
- Grade Unit
- g/t
- Intercept
- 1.8 m
- True Width
- 1.2 m
- From
- 998.4 m
- To
- 1000.2 m
- Intercept Depth
- 998.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:998.4-1000.2
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 3.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.1 g/t·m is below.
Negative factors
- 3.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.4”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
AndB26 Polymetallic Deposit · zincGrade: 0Grade Unit: %Intercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- B26 Polymetallic Deposit
- Commodity
- zinc
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- AMQ
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1.8 m
- True Width
- 1.2 m
- From
- 998.4 m
- To
- 1000.2 m
- Intercept Depth
- 998.4 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- And:998.4-1000.2
- Mining Method
- underground
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: Expanded from assay table. 0 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.0”
Context: And
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "It targeted a zone on the eastern side of the deposit and delivered materially higher-grade results than anticipated, in"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.