AAJ: Drilling Continues to Expand Tillex Copper-Silver System

Original announcement by asx on Oct 21, 2026

Bullish

Company: Aruma Resources Ltd
Ticker: AAJ
Exchange: ASX
Region: Ontario, Canada
Primary commodity: Copper
Secondary commodities: Silver, Gold
Document categories: Drill results
Extracted: 2026-10-21 22:23:52 UTC

Atlas analysis published: Oct 21, 2026

Minestarters Atlas analysis

Summary

Aruma Resources Ltd announced further high-grade copper and silver drill results from its Phase-2 diamond drilling program at the Tillex Project in Ontario, Canada. New intercepts, including 38.58m at 1.69% Cu and 4.82 g/t Ag, have extended the high-grade mineralisation to approximately 230m strike length. The results confirm the continuity of shallow, wide mineralisation and highlight the project's potential for further expansion.

Reasoning: New high-grade copper and silver intercepts from Phase-2 drilling extend the known mineralisation and confirm continuity, with detailed QA/QC. The shallow, flat-lying geometry and high-grade fault breccias enhance the project's potential. The new results include significantly higher peak grades and larger grade-thickness products compared to prior results.

Positive factors

High-grade copper and silver intercepts
Significant intercept lengths
Extension of strike length to 230m
Shallow mineralization
Favorable flat-lying geometry
Discovery of high-grade fault breccias
Detailed QA/QC disclosure
Compositing parameters disclosed
Exploration drilling expanding the system

Negative factors

Apparent Width Only
Gold grades are low

Facts used in scoring: 64

Classification and evidence

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: The release includes detailed QA/QC disclosure in JORC Table 1, mentioning certified lab (Actlabs), standards, blanks, duplicates, and QP sign-off.

Evidence · text

“Quality control procedures included the insertion of field duplicates, blanks and commercial certified reference material for standards targeting a nominal 12% QAQC sampling. CRM samples from OreAs were inserted every 20 samples.”

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: The cut-off grade and internal dilution rules are clearly stated for reported intervals.

Evidence · text

“Note - Intercepts based on a lower cutoff of 0.25% Cu and a maximum of 2.5m of internal dilution.”

Apparent Width Onlynegative

Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: The interval is given as downhole width with no true width or drill orientation explicitly stating true width.

Evidence · text

“No assumption of true widths of mineralised zones made in reported results”

Step-Out Extensionpositive

Mineralization extended beyond the previously known limit.

Why it applies: Drilling has extended the high-grade zone to ~230m in strike and further extended the lateral south-west strike continuity.

Evidence · text

“Drilling has extended the northeast-southwest trending Tillex high-grade zone to ~230m in strike”

Bonanza Interceptpositive

Exceptionally high-grade zone, well above the deposit-type norm.

Why it applies: The intercept of 0.34m @ 15.5% Cu is exceptionally high-grade, well above the deposit-type norm for copper.

Evidence · text

“0.34m @ 15.5% Cu and 110g/t Ag from 114.44m (TX26-012)”

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: Historical results from previous Phase-2 and Phase-1 drilling are re-announced for comparison, with no new assays or reinterpretation.

Evidence · text

“Highlight Cu and Ag results from previous Phase-2 diamond drilling (TX26-006 – TX26-10)1; 1AAJ ASX announcement 17 September 2026”

Extracted facts

Stored fact records: 64. Some facts used in scoring do not have a stored record.

Drill Results (64)

TX26-012Tillex · copperGrade: 1.69Grade Unit: %Intercept: 38.58 mView all details

Link to this fact

Identity

Hole ID: TX26-012
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.69
Grade Unit: %
Intercept: 38.58 m
From: 46.4 m
To: 84.98 m
Hole Depth: 120 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-012:46.4-84.98
Mining Method: open_pit

Location

Easting: 532907
Northing: 5371341
CRS: NAD83 Zone 17N
Elevation: 267.08 m
Azimuth: 312 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This new intercept is high-grade and of significant length, contributing to the expansion of the mineralized system. The grade is above the project's average copper grade and the grade-thickness product is substantial.

Positive factors

High-grade copper intercept
Significant intercept length
Shallow mineralization
Above prior average grade
Significant grade-thickness product

Negative factors

Apparent Width Only

Evidence · text

“38.58m @ 1.69% Cu and 4.82 g/t Ag from 46.4m (TX26-012)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-012Tillex · silverGrade: 4.82Grade Unit: g/tIntercept: 38.58 mView all details

Link to this fact

Identity

Hole ID: TX26-012
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 4.82
Grade Unit: g/t
Intercept: 38.58 m
From: 46.4 m
To: 84.98 m
Hole Depth: 120 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-012:46.4-84.98
Mining Method: open_pit

Location

Easting: 532907
Northing: 5371341
CRS: NAD83 Zone 17N
Elevation: 267.08 m
Azimuth: 312 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This silver intercept is of significant length and shallow, but the grade is slightly below the project's average silver grade.

Positive factors

Significant intercept length
Shallow mineralization

Negative factors

Apparent Width Only
Below prior average grade

Evidence · text

“38.58m @ 1.69% Cu and 4.82 g/t Ag from 46.4m (TX26-012)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-012Tillex · copperGrade: 1.47Grade Unit: %Intercept: 9.12 mView all details

Link to this fact

Identity

Hole ID: TX26-012
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.47
Grade Unit: %
Intercept: 9.12 m
From: 48.4 m
To: 57.52 m
Hole Depth: 120 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-012:48.4-57.52
Mining Method: open_pit

Location

Easting: 532907
Northing: 5371341
CRS: NAD83 Zone 17N
Elevation: 267.08 m
Azimuth: 312 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This sub-interval shows good copper grades over a moderate length, contributing positively to the overall intercept and is above the project's average copper grade.

Positive factors

High-grade copper intercept
Moderate intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only

Evidence · text

“9.12m @ 1.47% Cu and 8.41 g/t Ag from 48.4m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-012Tillex · silverGrade: 8.41Grade Unit: g/tIntercept: 9.12 mView all details

Link to this fact

Identity

Hole ID: TX26-012
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 8.41
Grade Unit: g/t
Intercept: 9.12 m
From: 48.4 m
To: 57.52 m
Hole Depth: 120 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-012:48.4-57.52
Mining Method: open_pit

Location

Easting: 532907
Northing: 5371341
CRS: NAD83 Zone 17N
Elevation: 267.08 m
Azimuth: 312 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This sub-interval shows good silver grades over a moderate length, contributing positively to the overall intercept and is above the project's average silver grade.

Positive factors

High-grade silver intercept
Moderate intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only

Evidence · text

“9.12m @ 1.47% Cu and 8.41 g/t Ag from 48.4m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-012Tillex · copperGrade: 1.63Grade Unit: %Intercept: 8.87 mView all details

Link to this fact

Identity

Hole ID: TX26-012
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.63
Grade Unit: %
Intercept: 8.87 m
From: 69.31 m
To: 78.18 m
Hole Depth: 120 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-012:69.31-78.18
Mining Method: open_pit

Location

Easting: 532907
Northing: 5371341
CRS: NAD83 Zone 17N
Elevation: 267.08 m
Azimuth: 312 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This sub-interval shows good copper grades over a moderate length, contributing positively to the overall intercept and is above the project's average copper grade.

Positive factors

High-grade copper intercept
Moderate intercept length
Above prior average grade

Negative factors

Apparent Width Only

Evidence · text

“8.87m @ 1.63% Cu and 13.59 g/t Ag from 69.31m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-012Tillex · silverGrade: 13.59Grade Unit: g/tIntercept: 8.87 mView all details

Link to this fact

Identity

Hole ID: TX26-012
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 13.59
Grade Unit: g/t
Intercept: 8.87 m
From: 69.31 m
To: 78.18 m
Hole Depth: 120 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-012:69.31-78.18
Mining Method: open_pit

Location

Easting: 532907
Northing: 5371341
CRS: NAD83 Zone 17N
Elevation: 267.08 m
Azimuth: 312 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This sub-interval shows high silver grades over a moderate length, significantly above the project's average silver grade.

Positive factors

High-grade silver intercept
Moderate intercept length
Above prior average grade

Negative factors

Apparent Width Only

Evidence · text

“8.87m @ 1.63% Cu and 13.59 g/t Ag from 69.31m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-012Tillex · copperGrade: 6.8Grade Unit: %Intercept: 0.34 mView all details

Link to this fact

Identity

Hole ID: TX26-012
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 6.8
Grade Unit: %
Intercept: 0.34 m
From: 96.62 m
To: 96.96 m
Hole Depth: 120 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-012:96.62-96.96
Mining Method: open_pit

Location

Easting: 532907
Northing: 5371341
CRS: NAD83 Zone 17N
Elevation: 267.08 m
Azimuth: 312 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This intercept shows an exceptionally high copper grade, significantly above the project's prior best grade, indicating a bonanza zone despite its narrow width.

Positive factors

Bonanza Intercept
Exceptional copper grade
Above prior best grade

Negative factors

Apparent Width Only
Narrow intercept length

Evidence · text

“0.34m @ 6.8% Cu and 48g/t Ag from 96.62m (TX26-012)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-012Tillex · silverGrade: 48Grade Unit: g/tIntercept: 0.34 mView all details

Link to this fact

Identity

Hole ID: TX26-012
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 48
Grade Unit: g/t
Intercept: 0.34 m
From: 96.62 m
To: 96.96 m
Hole Depth: 120 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-012:96.62-96.96
Mining Method: open_pit

Location

Easting: 532907
Northing: 5371341
CRS: NAD83 Zone 17N
Elevation: 267.08 m
Azimuth: 312 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This intercept shows a high silver grade, well above the project's average, but is very narrow.

Positive factors

High-grade silver intercept
Above prior average grade

Negative factors

Apparent Width Only
Narrow intercept length

Evidence · text

“0.34m @ 6.8% Cu and 48g/t Ag from 96.62m (TX26-012)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-012Tillex · copperGrade: 15.5Grade Unit: %Intercept: 0.34 mView all details

Link to this fact

Identity

Hole ID: TX26-012
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 15.5
Grade Unit: %
Intercept: 0.34 m
From: 114.44 m
To: 114.78 m
Hole Depth: 120 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-012:114.44-114.78
Mining Method: open_pit

Location

Easting: 532907
Northing: 5371341
CRS: NAD83 Zone 17N
Elevation: 267.08 m
Azimuth: 312 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This intercept represents an exceptionally high copper grade, significantly exceeding the project's prior best grade, indicating a bonanza zone despite its narrow width. This is a very strong result.

Positive factors

Bonanza Intercept
Exceptional copper grade
Above prior best grade

Negative factors

Apparent Width Only
Narrow intercept length

Evidence · text

“0.34m @ 15.5% Cu and 110g/t Ag from 114.44m (TX26-012)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-012Tillex · silverGrade: 110Grade Unit: g/tIntercept: 0.34 mView all details

Link to this fact

Identity

Hole ID: TX26-012
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 110
Grade Unit: g/t
Intercept: 0.34 m
From: 114.44 m
To: 114.78 m
Hole Depth: 120 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-012:114.44-114.78
Mining Method: open_pit

Location

Easting: 532907
Northing: 5371341
CRS: NAD83 Zone 17N
Elevation: 267.08 m
Azimuth: 312 °
Dip: -70 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This intercept shows an exceptionally high silver grade, significantly exceeding the project's prior best grade, indicating a bonanza zone despite its narrow width.

Positive factors

Bonanza Intercept
Exceptional silver grade
Above prior best grade

Negative factors

Apparent Width Only
Narrow intercept length

Evidence · text

“0.34m @ 15.5% Cu and 110g/t Ag from 114.44m (TX26-012)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-011Tillex · copperGrade: 1.69Grade Unit: %Intercept: 15.95 mView all details

Link to this fact

Identity

Hole ID: TX26-011
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.69
Grade Unit: %
Intercept: 15.95 m
From: 46.4 m
To: 62.35 m
Hole Depth: 134 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-011:46.4-62.35
Mining Method: open_pit

Location

Easting: 532905
Northing: 5371377
CRS: NAD83 Zone 17N
Elevation: 267.17 m
Azimuth: 132 °
Dip: -56 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This new intercept is high-grade and of significant length, contributing to the expansion of the mineralized system. The grade is above the project's average copper grade.

Positive factors

High-grade copper intercept
Significant intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only

Evidence · text

“15.95m @ 1.69% Cu and 4.82/t Ag from 46.4m (TX26-011)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-011Tillex · silverGrade: 4.82Grade Unit: g/tIntercept: 15.95 mView all details

Link to this fact

Identity

Hole ID: TX26-011
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 4.82
Grade Unit: g/t
Intercept: 15.95 m
From: 46.4 m
To: 62.35 m
Hole Depth: 134 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-011:46.4-62.35
Mining Method: open_pit

Location

Easting: 532905
Northing: 5371377
CRS: NAD83 Zone 17N
Elevation: 267.17 m
Azimuth: 132 °
Dip: -56 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This silver intercept is of significant length and shallow, but the grade is slightly below the project's average silver grade.

Positive factors

Significant intercept length
Shallow mineralization

Negative factors

Apparent Width Only
Below prior average grade

Evidence · text

“15.95m @ 1.69% Cu and 4.82/t Ag from 46.4m (TX26-011)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-011Tillex · copperGrade: 2.32Grade Unit: %Intercept: 8.2 mView all details

Link to this fact

Identity

Hole ID: TX26-011
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 2.32
Grade Unit: %
Intercept: 8.2 m
From: 46.4 m
To: 54.6 m
Hole Depth: 134 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-011:46.4-54.6
Mining Method: open_pit

Location

Easting: 532905
Northing: 5371377
CRS: NAD83 Zone 17N
Elevation: 267.17 m
Azimuth: 132 °
Dip: -56 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This sub-interval shows high copper grades over a moderate length, contributing positively to the overall intercept and is above the project's average copper grade.

Positive factors

High-grade copper intercept
Moderate intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only

Evidence · text

“8.2m @ 2.32% Cu and 3.92/t Ag from 46.4m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-011Tillex · silverGrade: 3.92Grade Unit: g/tIntercept: 8.2 mView all details

Link to this fact

Identity

Hole ID: TX26-011
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 3.92
Grade Unit: g/t
Intercept: 8.2 m
From: 46.4 m
To: 54.6 m
Hole Depth: 134 m
Intercept Depth: 46.4 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-011:46.4-54.6
Mining Method: open_pit

Location

Easting: 532905
Northing: 5371377
CRS: NAD83 Zone 17N
Elevation: 267.17 m
Azimuth: 132 °
Dip: -56 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This sub-interval shows silver grades over a moderate length, but the grade is below the project's average silver grade.

Positive factors

Moderate intercept length
Shallow mineralization

Negative factors

Apparent Width Only
Below prior average grade

Evidence · text

“8.2m @ 2.32% Cu and 3.92/t Ag from 46.4m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-013Tillex · copperGrade: 1.43Grade Unit: %Intercept: 12.7 mView all details

Link to this fact

Identity

Hole ID: TX26-013
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.43
Grade Unit: %
Intercept: 12.7 m
From: 54 m
To: 66.7 m
Hole Depth: 90.1 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-013:54-66.7
Mining Method: open_pit

Location

Easting: 532891
Northing: 5371358
CRS: NAD83 Zone 17N
Elevation: 267.1 m
Azimuth: 313 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This new intercept shows good copper grades over a moderate length, contributing to the expansion of the mineralized system and is above the project's average copper grade.

Positive factors

High-grade copper intercept
Moderate intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only

Evidence · text

“12.7m @ 1.43% Cu and 5.96 g/t Ag from 54m (TX26-013)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-013Tillex · silverGrade: 5.96Grade Unit: g/tIntercept: 12.7 mView all details

Link to this fact

Identity

Hole ID: TX26-013
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 5.96
Grade Unit: g/t
Intercept: 12.7 m
From: 54 m
To: 66.7 m
Hole Depth: 90.1 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-013:54-66.7
Mining Method: open_pit

Location

Easting: 532891
Northing: 5371358
CRS: NAD83 Zone 17N
Elevation: 267.1 m
Azimuth: 313 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This silver intercept is of moderate length and shallow, but the grade is slightly below the project's average silver grade.

Positive factors

Moderate intercept length
Shallow mineralization

Negative factors

Apparent Width Only
Below prior average grade

Evidence · text

“12.7m @ 1.43% Cu and 5.96 g/t Ag from 54m (TX26-013)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-013Tillex · copperGrade: 2.35Grade Unit: %Intercept: 6.2 mView all details

Link to this fact

Identity

Hole ID: TX26-013
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 2.35
Grade Unit: %
Intercept: 6.2 m
From: 54 m
To: 60.2 m
Hole Depth: 90.1 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-013:54-60.2
Mining Method: open_pit

Location

Easting: 532891
Northing: 5371358
CRS: NAD83 Zone 17N
Elevation: 267.1 m
Azimuth: 313 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This sub-interval shows high copper grades over a moderate length, contributing positively to the overall intercept and is above the project's average copper grade.

Positive factors

High-grade copper intercept
Moderate intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only

Evidence · text

“6.2m @ 2.35% Cu and 8.62 g/t Ag from 54m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-013Tillex · silverGrade: 8.62Grade Unit: g/tIntercept: 6.2 mView all details

Link to this fact

Identity

Hole ID: TX26-013
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 8.62
Grade Unit: g/t
Intercept: 6.2 m
From: 54 m
To: 60.2 m
Hole Depth: 90.1 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-013:54-60.2
Mining Method: open_pit

Location

Easting: 532891
Northing: 5371358
CRS: NAD83 Zone 17N
Elevation: 267.1 m
Azimuth: 313 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This sub-interval shows high silver grades over a moderate length, contributing positively to the overall intercept and is above the project's average silver grade.

Positive factors

High-grade silver intercept
Moderate intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only

Evidence · text

“6.2m @ 2.35% Cu and 8.62 g/t Ag from 54m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-013Tillex · copperGrade: 2.21Grade Unit: %Intercept: 7.68 mView all details

Link to this fact

Identity

Hole ID: TX26-013
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 2.21
Grade Unit: %
Intercept: 7.68 m
From: 70 m
To: 77.68 m
Hole Depth: 90.1 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-013:70-77.68
Mining Method: open_pit

Location

Easting: 532891
Northing: 5371358
CRS: NAD83 Zone 17N
Elevation: 267.1 m
Azimuth: 313 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This new intercept shows high copper grades over a moderate length, contributing positively to the overall intercept and is above the project's average copper grade.

Positive factors

High-grade copper intercept
Moderate intercept length
Above prior average grade

Negative factors

Apparent Width Only

Evidence · text

“7.68m @ 2.21% Cu and 7.49 g/t Ag from 70m (TX26-013)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-013Tillex · silverGrade: 7.49Grade Unit: g/tIntercept: 7.68 mView all details

Link to this fact

Identity

Hole ID: TX26-013
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 7.49
Grade Unit: g/t
Intercept: 7.68 m
From: 70 m
To: 77.68 m
Hole Depth: 90.1 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-013:70-77.68
Mining Method: open_pit

Location

Easting: 532891
Northing: 5371358
CRS: NAD83 Zone 17N
Elevation: 267.1 m
Azimuth: 313 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This new intercept shows high silver grades over a moderate length, contributing positively to the overall intercept and is above the project's average silver grade.

Positive factors

High-grade silver intercept
Moderate intercept length
Above prior average grade

Negative factors

Apparent Width Only

Evidence · text

“7.68m @ 2.21% Cu and 7.49 g/t Ag from 70m (TX26-013)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-013Tillex · goldGrade: 0.42Grade Unit: g/tIntercept: 3.3 mView all details

Link to this fact

Identity

Hole ID: TX26-013
Project: Tillex
Commodity: gold
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 0.42
Grade Unit: g/t
Intercept: 3.3 m
From: 66.7 m
To: 70 m
Hole Depth: 90.1 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-013:66.7-70
Mining Method: open_pit

Location

Easting: 532891
Northing: 5371358
CRS: NAD83 Zone 17N
Elevation: 267.1 m
Azimuth: 313 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a new gold intercept, indicating potential for a secondary commodity, but the grade is low for gold.

Positive factors

New commodity identified

Negative factors

Apparent Width Only
Low gold grade

Evidence · text

“3.3m @ 0.42 g/t Au from 66.7m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-013Tillex · goldGrade: 0.76Grade Unit: g/tIntercept: 1 mView all details

Link to this fact

Identity

Hole ID: TX26-013
Project: Tillex
Commodity: gold
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 0.76
Grade Unit: g/t
Intercept: 1 m
From: 69 m
To: 70 m
Hole Depth: 90.1 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-013:69-70
Mining Method: open_pit

Location

Easting: 532891
Northing: 5371358
CRS: NAD83 Zone 17N
Elevation: 267.1 m
Azimuth: 313 °
Dip: -60 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This sub-interval shows a slightly higher gold grade but is still low and very narrow, indicating minor gold potential.

Positive factors

New commodity identified

Negative factors

Apparent Width Only
Low gold grade
Narrow intercept length

Evidence · text

“1.0m @ 0.76 g/t Au from 69m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-010Tillex · copperGrade: 1Grade Unit: %Intercept: 27 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-010
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1
Grade Unit: %
Intercept: 27 m
From: 54 m
To: 81 m
Hole Depth: 92.4 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-010:54-81
Mining Method: open_pit

Location

Easting: 532922
Northing: 5371361
CRS: NAD83 Zone 17N
Elevation: 267.19 m
Azimuth: 314 °
Dip: -56 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of significant length, previously announced, and is included for comparative purposes.

Positive factors

High-grade copper intercept
Significant intercept length
Shallow mineralization

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“27m @ 1.0% Cu and 3.92g/t Ag from 54m (TX26-010)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-010Tillex · silverGrade: 3.92Grade Unit: g/tIntercept: 27 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-010
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 3.92
Grade Unit: g/t
Intercept: 27 m
From: 54 m
To: 81 m
Hole Depth: 92.4 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-010:54-81
Mining Method: open_pit

Location

Easting: 532922
Northing: 5371361
CRS: NAD83 Zone 17N
Elevation: 267.19 m
Azimuth: 314 °
Dip: -56 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical silver intercept of significant length, previously announced, and is included for comparative purposes, but the grade is below the project's average.

Positive factors

Significant intercept length
Shallow mineralization

Negative factors

Apparent Width Only
Stale Data Re-release
Below prior average grade

Evidence · text

“27m @ 1.0% Cu and 3.92g/t Ag from 54m (TX26-010)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-010Tillex · copperGrade: 1.26Grade Unit: %Intercept: 17.85 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-010
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.26
Grade Unit: %
Intercept: 17.85 m
From: 54 m
To: 71.85 m
Hole Depth: 92.4 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-010:54-71.85
Mining Method: open_pit

Location

Easting: 532922
Northing: 5371361
CRS: NAD83 Zone 17N
Elevation: 267.19 m
Azimuth: 314 °
Dip: -56 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of significant length, previously announced, and is included for comparative purposes.

Positive factors

High-grade copper intercept
Significant intercept length
Shallow mineralization

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“17.85m @ 1.26% Cu and 4.53g/t Ag from 54m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-010Tillex · silverGrade: 4.53Grade Unit: g/tIntercept: 17.85 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-010
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 4.53
Grade Unit: g/t
Intercept: 17.85 m
From: 54 m
To: 71.85 m
Hole Depth: 92.4 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-010:54-71.85
Mining Method: open_pit

Location

Easting: 532922
Northing: 5371361
CRS: NAD83 Zone 17N
Elevation: 267.19 m
Azimuth: 314 °
Dip: -56 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical silver intercept of significant length, previously announced, and is included for comparative purposes, but the grade is below the project's average.

Positive factors

Significant intercept length
Shallow mineralization

Negative factors

Apparent Width Only
Stale Data Re-release
Below prior average grade

Evidence · text

“17.85m @ 1.26% Cu and 4.53g/t Ag from 54m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-010Tillex · copperGrade: 1.63Grade Unit: %Intercept: 2.9 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-010
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.63
Grade Unit: %
Intercept: 2.9 m
From: 54 m
To: 56.9 m
Hole Depth: 92.4 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-010:54-56.9
Mining Method: open_pit

Location

Easting: 532922
Northing: 5371361
CRS: NAD83 Zone 17N
Elevation: 267.19 m
Azimuth: 314 °
Dip: -56 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release
Narrow intercept length

Evidence · text

“2.9m @ 1.63% Cu and 9.57g/t Ag”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-010Tillex · silverGrade: 9.57Grade Unit: g/tIntercept: 2.9 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-010
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 9.57
Grade Unit: g/t
Intercept: 2.9 m
From: 54 m
To: 56.9 m
Hole Depth: 92.4 m
Intercept Depth: 54 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-010:54-56.9
Mining Method: open_pit

Location

Easting: 532922
Northing: 5371361
CRS: NAD83 Zone 17N
Elevation: 267.19 m
Azimuth: 314 °
Dip: -56 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade silver intercept, previously announced, and is included for comparative purposes. It is above the project's average silver grade.

Positive factors

High-grade silver intercept
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release
Narrow intercept length

Evidence · text

“2.9m @ 1.63% Cu and 9.57g/t Ag”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-006Tillex · copperGrade: 1.38Grade Unit: %Intercept: 14 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-006
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.38
Grade Unit: %
Intercept: 14 m
From: 83 m
To: 97 m
Hole Depth: 195 m
Intercept Depth: 83 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-006:83-97
Mining Method: open_pit

Location

Easting: 533060
Northing: 5371374
CRS: NAD83 Zone 17N
Elevation: 266.59 m
Azimuth: 314 °
Dip: -53 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of moderate length, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Moderate intercept length
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“14m @ 1.38% Cu and 5.0g/t Ag from 83m (TX26-006)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-006Tillex · silverGrade: 5Grade Unit: g/tIntercept: 14 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-006
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 5
Grade Unit: g/t
Intercept: 14 m
From: 83 m
To: 97 m
Hole Depth: 195 m
Intercept Depth: 83 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-006:83-97
Mining Method: open_pit

Location

Easting: 533060
Northing: 5371374
CRS: NAD83 Zone 17N
Elevation: 266.59 m
Azimuth: 314 °
Dip: -53 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical silver intercept of moderate length, previously announced, and is included for comparative purposes, but the grade is below the project's average.

Positive factors

Moderate intercept length

Negative factors

Apparent Width Only
Stale Data Re-release
Below prior average grade

Evidence · text

“14m @ 1.38% Cu and 5.0g/t Ag from 83m (TX26-006)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-006Tillex · copperGrade: 3.6Grade Unit: %Intercept: 2.1 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-006
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 3.6
Grade Unit: %
Intercept: 2.1 m
From: 83 m
To: 85.1 m
Hole Depth: 195 m
Intercept Depth: 83 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-006:83-85.1
Mining Method: open_pit

Location

Easting: 533060
Northing: 5371374
CRS: NAD83 Zone 17N
Elevation: 266.59 m
Azimuth: 314 °
Dip: -53 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release
Narrow intercept length

Evidence · text

“2.1m @ 3.6% Cu and 12.95g/t Ag from 83m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-006Tillex · silverGrade: 12.95Grade Unit: g/tIntercept: 2.1 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-006
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 12.95
Grade Unit: g/t
Intercept: 2.1 m
From: 83 m
To: 85.1 m
Hole Depth: 195 m
Intercept Depth: 83 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-006:83-85.1
Mining Method: open_pit

Location

Easting: 533060
Northing: 5371374
CRS: NAD83 Zone 17N
Elevation: 266.59 m
Azimuth: 314 °
Dip: -53 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade silver intercept, previously announced, and is included for comparative purposes. It is significantly above the project's average silver grade.

Positive factors

High-grade silver intercept
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release
Narrow intercept length

Evidence · text

“2.1m @ 3.6% Cu and 12.95g/t Ag from 83m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-009Tillex · copperGrade: 1.07Grade Unit: %Intercept: 11.68 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-009
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.07
Grade Unit: %
Intercept: 11.68 m
From: 39 m
To: 50.68 m
Hole Depth: 81 m
Intercept Depth: 39 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-009:39-50.68
Mining Method: open_pit

Location

Easting: 532957
Northing: 5371410
CRS: NAD83 Zone 17N
Elevation: 266.97 m
Azimuth: 310 °
Dip: -51 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of moderate length, previously announced, and is included for comparative purposes.

Positive factors

High-grade copper intercept
Moderate intercept length
Shallow mineralization

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“11.68m @ 1.07% Cu and 5.61g/t Ag from 39m (TX26-009)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-009Tillex · silverGrade: 5.61Grade Unit: g/tIntercept: 11.68 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-009
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 5.61
Grade Unit: g/t
Intercept: 11.68 m
From: 39 m
To: 50.68 m
Hole Depth: 81 m
Intercept Depth: 39 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-009:39-50.68
Mining Method: open_pit

Location

Easting: 532957
Northing: 5371410
CRS: NAD83 Zone 17N
Elevation: 266.97 m
Azimuth: 310 °
Dip: -51 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical silver intercept of moderate length, previously announced, and is included for comparative purposes, but the grade is below the project's average.

Positive factors

Moderate intercept length
Shallow mineralization

Negative factors

Apparent Width Only
Stale Data Re-release
Below prior average grade

Evidence · text

“11.68m @ 1.07% Cu and 5.61g/t Ag from 39m (TX26-009)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-009Tillex · copperGrade: 1.74Grade Unit: %Intercept: 2.7 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-009
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.74
Grade Unit: %
Intercept: 2.7 m
From: 46 m
To: 48.7 m
Hole Depth: 81 m
Intercept Depth: 39 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-009:46-48.7
Mining Method: open_pit

Location

Easting: 532957
Northing: 5371410
CRS: NAD83 Zone 17N
Elevation: 266.97 m
Azimuth: 310 °
Dip: -51 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release
Narrow intercept length

Evidence · text

“2.7m @ 1.74% Cu and 7.63g/t Ag from 46m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-009Tillex · silverGrade: 7.63Grade Unit: g/tIntercept: 2.7 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-009
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 7.63
Grade Unit: g/t
Intercept: 2.7 m
From: 46 m
To: 48.7 m
Hole Depth: 81 m
Intercept Depth: 39 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-009:46-48.7
Mining Method: open_pit

Location

Easting: 532957
Northing: 5371410
CRS: NAD83 Zone 17N
Elevation: 266.97 m
Azimuth: 310 °
Dip: -51 °
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-09-17T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade silver intercept, previously announced, and is included for comparative purposes. It is above the project's average silver grade.

Positive factors

High-grade silver intercept
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release
Narrow intercept length

Evidence · text

“2.7m @ 1.74% Cu and 7.63g/t Ag from 46m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-004Tillex · copperGrade: 2.04Grade Unit: %Intercept: 89 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-004
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 2.04
Grade Unit: %
Intercept: 89 m
From: 38.8 m
To: 127.8 m
Intercept Depth: 38.8 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-004:38.8-127.8
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of continuous length, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Continuous intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“89m @ 2.04% Cu and 12.31g/t Ag from 38.8m (TX26-004)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-004Tillex · silverGrade: 12.31Grade Unit: g/tIntercept: 89 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-004
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 12.31
Grade Unit: g/t
Intercept: 89 m
From: 38.8 m
To: 127.8 m
Intercept Depth: 38.8 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-004:38.8-127.8
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade silver intercept of continuous length, previously announced, and is included for comparative purposes. It is significantly above the project's average silver grade.

Positive factors

High-grade silver intercept
Continuous intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“89m @ 2.04% Cu and 12.31g/t Ag from 38.8m (TX26-004)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-004Tillex · copperGrade: 3.13Grade Unit: %Intercept: 8 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-004
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 3.13
Grade Unit: %
Intercept: 8 m
From: 55 m
To: 63 m
Intercept Depth: 38.8 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-004:55-63
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of moderate length, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Moderate intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“8m @ 3.13% Cu and 5.5g/t Ag from 55m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-004Tillex · silverGrade: 5.5Grade Unit: g/tIntercept: 8 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-004
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 5.5
Grade Unit: g/t
Intercept: 8 m
From: 55 m
To: 63 m
Intercept Depth: 38.8 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-004:55-63
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical silver intercept of moderate length, previously announced, and is included for comparative purposes, but the grade is below the project's average.

Positive factors

Moderate intercept length
Shallow mineralization

Negative factors

Apparent Width Only
Stale Data Re-release
Below prior average grade

Evidence · text

“8m @ 3.13% Cu and 5.5g/t Ag from 55m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-004Tillex · copperGrade: 4.06Grade Unit: %Intercept: 3.9 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-004
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 4.06
Grade Unit: %
Intercept: 3.9 m
From: 74.1 m
To: 78 m
Intercept Depth: 38.8 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-004:74.1-78
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release
Narrow intercept length

Evidence · text

“3.9m @ 4.06% Cu and 43.6g/t Ag from 74.1m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-004Tillex · silverGrade: 43.6Grade Unit: g/tIntercept: 3.9 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-004
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 43.6
Grade Unit: g/t
Intercept: 3.9 m
From: 74.1 m
To: 78 m
Intercept Depth: 38.8 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-004:74.1-78
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade silver intercept, previously announced, and is included for comparative purposes. It is significantly above the project's average silver grade.

Positive factors

High-grade silver intercept
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release
Narrow intercept length

Evidence · text

“3.9m @ 4.06% Cu and 43.6g/t Ag from 74.1m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-004Tillex · copperGrade: 4.02Grade Unit: %Intercept: 16.87 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-004
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 4.02
Grade Unit: %
Intercept: 16.87 m
From: 93 m
To: 109.87 m
Intercept Depth: 38.8 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-004:93-109.87
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of significant length, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Significant intercept length
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“16.87m @ 4.02% Cu and 16.85g/t Ag from 93m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-004Tillex · silverGrade: 16.85Grade Unit: g/tIntercept: 16.87 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-004
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 16.85
Grade Unit: g/t
Intercept: 16.87 m
From: 93 m
To: 109.87 m
Intercept Depth: 38.8 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-004:93-109.87
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade silver intercept of significant length, previously announced, and is included for comparative purposes. It is significantly above the project's average silver grade.

Positive factors

High-grade silver intercept
Significant intercept length
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“16.87m @ 4.02% Cu and 16.85g/t Ag from 93m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-002Tillex · copperGrade: 1.99Grade Unit: %Intercept: 87 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-002
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.99
Grade Unit: %
Intercept: 87 m
From: 30 m
To: 117 m
Intercept Depth: 30 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-002:30-117
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of continuous length, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Continuous intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“87m @ 1.99% Cu and 12.63g/t Ag from 30m (TX26-002)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-002Tillex · silverGrade: 12.63Grade Unit: g/tIntercept: 87 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-002
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 12.63
Grade Unit: g/t
Intercept: 87 m
From: 30 m
To: 117 m
Intercept Depth: 30 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-002:30-117
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Positive factors

High-grade silver intercept
Continuous intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“87m @ 1.99% Cu and 12.63g/t Ag from 30m (TX26-002)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-002Tillex · copperGrade: 3.38Grade Unit: %Intercept: 17.74 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-002
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 3.38
Grade Unit: %
Intercept: 17.74 m
From: 42 m
To: 59.74 m
Intercept Depth: 30 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-002:42-59.74
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of significant length, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Significant intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“17.74m @ 3.38% Cu and 7.46g/t Ag from 42m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-002Tillex · silverGrade: 7.46Grade Unit: g/tIntercept: 17.74 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-002
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 7.46
Grade Unit: g/t
Intercept: 17.74 m
From: 42 m
To: 59.74 m
Intercept Depth: 30 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-002:42-59.74
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade silver intercept of significant length, previously announced, and is included for comparative purposes. It is above the project's average silver grade.

Positive factors

High-grade silver intercept
Significant intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“17.74m @ 3.38% Cu and 7.46g/t Ag from 42m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-002Tillex · copperGrade: 5.36Grade Unit: %Intercept: 5.6 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-002
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 5.36
Grade Unit: %
Intercept: 5.6 m
From: 98 m
To: 103.6 m
Intercept Depth: 30 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-002:98-103.6
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of moderate length, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Moderate intercept length
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“5.6m @ 5.36% Cu and 56.89g/t Ag from 98m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-002Tillex · silverGrade: 56.89Grade Unit: g/tIntercept: 5.6 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-002
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 56.89
Grade Unit: g/t
Intercept: 5.6 m
From: 98 m
To: 103.6 m
Intercept Depth: 30 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-002:98-103.6
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade silver intercept of moderate length, previously announced, and is included for comparative purposes. It is significantly above the project's average silver grade.

Positive factors

High-grade silver intercept
Moderate intercept length
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“5.6m @ 5.36% Cu and 56.89g/t Ag from 98m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-002Tillex · copperGrade: 3.8Grade Unit: %Intercept: 12.1 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-002
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 3.8
Grade Unit: %
Intercept: 12.1 m
From: 92.5 m
To: 104.6 m
Intercept Depth: 30 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-002:92.5-104.6
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of moderate length, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Moderate intercept length
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“12.1m @ 3.80% Cu and 34.14g/t Ag from 92.5m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-002Tillex · silverGrade: 34.14Grade Unit: g/tIntercept: 12.1 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-002
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 34.14
Grade Unit: g/t
Intercept: 12.1 m
From: 92.5 m
To: 104.6 m
Intercept Depth: 30 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-002:92.5-104.6
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Positive factors

High-grade silver intercept
Moderate intercept length
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“12.1m @ 3.80% Cu and 34.14g/t Ag from 92.5m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-005Tillex · copperGrade: 1.91Grade Unit: %Intercept: 59 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-005
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.91
Grade Unit: %
Intercept: 59 m
From: 38 m
To: 97 m
Intercept Depth: 38 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-005:38-97
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of continuous length, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Continuous intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“59m @ 1.91% Cu and 8.80g/t Ag from 38m (TX26-005)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-005Tillex · silverGrade: 8.8Grade Unit: g/tIntercept: 59 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-005
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 8.8
Grade Unit: g/t
Intercept: 59 m
From: 38 m
To: 97 m
Intercept Depth: 38 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-005:38-97
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade silver intercept of continuous length, previously announced, and is included for comparative purposes. It is above the project's average silver grade.

Positive factors

High-grade silver intercept
Continuous intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“59m @ 1.91% Cu and 8.80g/t Ag from 38m (TX26-005)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-005Tillex · copperGrade: 2.84Grade Unit: %Intercept: 17 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-005
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 2.84
Grade Unit: %
Intercept: 17 m
From: 43 m
To: 60 m
Intercept Depth: 38 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-005:43-60
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of significant length, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Significant intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“17m @ 2.84% Cu and 10.48g/t Ag from 43m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-005Tillex · silverGrade: 10.48Grade Unit: g/tIntercept: 17 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-005
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 10.48
Grade Unit: g/t
Intercept: 17 m
From: 43 m
To: 60 m
Intercept Depth: 38 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-005:43-60
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Positive factors

High-grade silver intercept
Significant intercept length
Shallow mineralization
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“17m @ 2.84% Cu and 10.48g/t Ag from 43m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-005Tillex · copperGrade: 3.13Grade Unit: %Intercept: 9.07 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-005
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 3.13
Grade Unit: %
Intercept: 9.07 m
From: 80 m
To: 89.07 m
Intercept Depth: 38 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-005:80-89.07
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical high-grade copper intercept of moderate length, previously announced, and is included for comparative purposes. It is above the project's average copper grade.

Positive factors

High-grade copper intercept
Moderate intercept length
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“9.07m @ 3.13% Cu and 12.80g/t Ag from 80m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-005Tillex · silverGrade: 12.8Grade Unit: g/tIntercept: 9.07 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-005
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 12.8
Grade Unit: g/t
Intercept: 9.07 m
From: 80 m
To: 89.07 m
Intercept Depth: 38 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-005:80-89.07
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Positive factors

High-grade silver intercept
Moderate intercept length
Above prior average grade

Negative factors

Apparent Width Only
Stale Data Re-release

Evidence · text

“9.07m @ 3.13% Cu and 12.80g/t Ag from 80m”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-003Tillex · copperGrade: 0.35Grade Unit: %Intercept: 5 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-003
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 0.35
Grade Unit: %
Intercept: 5 m
From: 31 m
To: 36 m
Intercept Depth: 31 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-003:31-36
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical low-grade copper intercept, previously announced, and is included for comparative purposes. The grade is low for copper.

Positive factors

Shallow mineralization

Negative factors

Apparent Width Only
Stale Data Re-release
Low copper grade

Evidence · text

“5m @ 0.35% Cu and 1.48g/t Ag from 31m (TX26-003)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-003Tillex · silverGrade: 1.48Grade Unit: g/tIntercept: 5 mHistorical resultNeeds review: historical_restatementView all details

Link to this fact

Identity

Hole ID: TX26-003
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.48
Grade Unit: g/t
Intercept: 5 m
From: 31 m
To: 36 m
Intercept Depth: 31 m

Classification

Deposit Type: vms
Program: exploration
Sample Type: drill
Group ID: TX26-003:31-36
Mining Method: open_pit

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Cutoff Grade: 0.25
Cutoff Unit: %
Dilution Disclosed: Yes
Max Dilution: 2.5 m

Review

Needs Review: Yes
Review Reason: historical_restatement
Interp. Status: scored
Historical: Yes
Historical Source Date: 2026-06-18T00:00:00.000Z

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: This is a historical low-grade silver intercept, previously announced, and is included for comparative purposes. The grade is low for silver and below the project's average.

Positive factors

Shallow mineralization

Negative factors

Apparent Width Only
Stale Data Re-release
Low silver grade
Below prior average grade

Evidence · text

“5m @ 0.35% Cu and 1.48g/t Ag from 31m (TX26-003)”

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Compositing Transparentpositive

Cut-off grade and internal dilution rules are clearly stated for reported intervals.

Why it applies: cutoff_grade and internal dilution are both stated

Stale Data Re-releasenegative

Historical results re-announced with no new assays or reinterpretation — low genuine novelty.

Why it applies: the fact restates a prior release

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-012Tillex · copperGrade: 1Grade Unit: %Intercept: 38.58 mView all details

Link to this fact

Identity

Hole ID: TX26-012
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1
Grade Unit: %
Intercept: 38.58 m
From: 46.42 m
To: 85 m
Intercept Depth: 46.42 m

Classification

Deposit Type: vms
Sample Type: drill
Group ID: TX26-012:46.42-85
Mining Method: open_pit

Location

Easting: 532907
Northing: 5371341
CRS: NAD83 Zone 17N
Elevation: 267.08 m
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Dilution Disclosed: Yes

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: Expanded from assay table. 1 % copper is moderate against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 38.6 %·m is weak (grade alone is moderate; the better of the two is used).

Negative factors

Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.00”

Context: TX26-012

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

TX26-012Tillex · silverGrade: 10.4Grade Unit: g/tIntercept: 38.58 mView all details

Link to this fact

Identity

Hole ID: TX26-012
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 10.4
Grade Unit: g/t
Intercept: 38.58 m
From: 46.42 m
To: 85 m
Intercept Depth: 46.42 m

Classification

Deposit Type: vms
Sample Type: drill
Group ID: TX26-012:46.42-85
Mining Method: open_pit

Location

Easting: 532907
Northing: 5371341
CRS: NAD83 Zone 17N
Elevation: 267.08 m
Loc. Confidence: high
Loc. Source: document

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Dilution Disclosed: Yes

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: Expanded from assay table. 10.4 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 401.2 g/t·m is weak (grade alone is below; the better of the two is used).

Negative factors

Scored from rubric bands during table expansion, not from document context.

Evidence · table

“10.40”

Context: TX26-012

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

andTillex · copperGrade: 1.63Grade Unit: %Intercept: 8.87 mView all details

Link to this fact

Identity

Hole ID: and
Project: Tillex
Commodity: copper
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 1.63
Grade Unit: %
Intercept: 8.87 m
From: 69.31 m
To: 78.18 m
Intercept Depth: 69.31 m

Classification

Deposit Type: vms
Sample Type: drill
Group ID: and:69.31-78.18
Mining Method: open_pit

Location

CRS: NAD83 Zone 17N

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Dilution Disclosed: Yes

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: Expanded from assay table. 1.63 % copper is strong against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 14.5 %·m is below (grade alone is strong; the better of the two is used).

Positive factors

1.63 % copper is strong on the vms deposit band.

Negative factors

Scored from rubric bands during table expansion, not from document context.

Evidence · table

“1.63”

Context: and

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

andTillex · silverGrade: 13.59Grade Unit: g/tIntercept: 8.87 mView all details

Link to this fact

Identity

Hole ID: and
Project: Tillex
Commodity: silver
Region: canada_on
Reported Region: canada_on
Ticker: AAJ

Geometry

Grade: 13.59
Grade Unit: g/t
Intercept: 8.87 m
From: 69.31 m
To: 78.18 m
Intercept Depth: 69.31 m

Classification

Deposit Type: vms
Sample Type: drill
Group ID: and:69.31-78.18
Mining Method: open_pit

Location

CRS: NAD83 Zone 17N

QA/QC

Laboratory: Actlabs
QA/QC Disclosed: Yes
QP Signed: Yes
QA/QC Methods: standards, blanks, duplicates

Compositing

Dilution Disclosed: Yes

Review

Needs Review: No
Interp. Status: scored
Historical: No

Dates

Event date: 2026-10-21T00:00:00.000Z

Reasoning: Expanded from assay table. 13.59 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 120.5 g/t·m is below.

Negative factors

13.59 g/t silver is below the weak threshold (30 g/t) on the default band.
Scored from rubric bands during table expansion, not from document context.

Evidence · table

“13.59”

Context: and

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Nearology Playneutral

Value premise rests on proximity to a known deposit rather than own results.

Why it applies: proximity is offered as the value premise: "• Aruma continues to assess opportunities to strategically expand its Tillex Project landholding through the acquisition"

How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.